Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Baby unit B. Parent unit A. Baby unit B. Parent unit EN Legend of functions A. Baby unit A-1 On/Off button (y) A-2 LINK light A-3 Night light A-4 Volume – / + buttons A-5 Microphone A-6 PAGE button A-7 Night light button ( ) A-8 Battery check light ( ) A-9 Battery compartment cover A-10 DC 9V / 300mA power supply jack A-11 AC power adapter B. Parent unit B-1 TALK button B-2 SENSITIVITY button B-3 DC3.6V / 200mA power supply jack B-4 Loudspeaker B-5 Microphone B-6 On/Off button (y) B-7 Battery check light ( ) B-8 LINK light B-9 Sound-level lights B-10 Volume – / + buttons B-11 Recess for the belt clip B-12 Battery compartment cover B-13 Belt clip B-14 AC power adapter C. What else you need Both units can be mains or battery operated. For battery-operated use you will need: – 4 x 1.5V, AA batteries for baby unit (not supplied) – 2 x 1.5V, AAA batteries for parent unit (not supplied) Contents EN 3 Illustrations 4 Legend of functions 4 Baby unit 4 Parent unit 4 What else you need 5 Contents 6 Welcome 6 Safety information 6 Getting your baby monitor ready for use 6 Baby unit 7 Parent unit 8 Using your baby monitor 9 Other features 9 Adjusting loudspeaker volume 10 Talking to your baby 10 Adjusting microphone sensitivity 11 Monitoring baby silently 11 Switching night light on / off 12 Connecting / disconnecting belt clip 12 Paging parent unit 13 Troubleshooting 15 Frequently asked questions 16 Important information 16 Technical specifications 16 Maintenance 17 Environmental information 17 Factory initialization mode 18 Guarantee and service EN Welcome Philips is dedicated to producing caring, reliable products to give parents the reassurance they need.You can trust this Philips baby monitor to provide round-the-clock support by ensuring you can always hear your baby clearly without any distracting noise. Your SCD487 uses DECT technology which guarantees zero interference from other wireless appliances and a clear signal between the parent unit and baby unit. Philips Baby Care, taking care together Safety information Please read this user manual carefully before using your baby monitor and keep it for future reference. This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. • Make sure the baby unit and adapter cable are always out of reach of the baby (at least 1 meter / 3 feet away). • Never place the baby unit inside the baby’s bed or playpen. • Never cover the baby monitor (with a towel, blanket, etc.). • Never use the baby monitor in moist places or close to water. • Check if the voltage indicated on the type plate of the adapters (A-11, B14) corresponds to the local power voltage before connecting to the AC power supply. • Do not expose the baby monitor to extreme cold, heat or light (e.g. direct sunlight). • To prevent electric shock, do not open the case of the baby unit and parent unit (except battery compartment covers). Getting your baby monitor ready for use Baby unit The baby unit can be mains or battery operated. When batteries are inserted, you will have an automatic back-up in case of mains failure. Mains operated use 1 Connect the power adapter cord (A-11) to the power supply jack (DC 9V / 300mA - A-10) of the baby unit. 2 Connect the AC power adapter (A-11) to a wall outlet. . The baby unit is now ready for mains operated use! Getting your baby monitor ready for use EN Battery operated use 1 Open the battery compartment by turning the cover (A-9) to the left (1 OPEN), using the palm of your hand. Take off the cover. 2 Insert four 1.5V, AA batteries, noting the + and – configuration inside the battery compartment (batteries are not supplied; we recommend Philips Alkaline batteries). 3 Put the battery compartment cover (A-9) back in place. Close the compartment by turning the cover (A-9) to the right (CLOSE 2), using the palm of your hand. . The baby unit is now ready for battery operated use! Parent unit The parent unit can be mains or battery operated. When batteries are inserted, you will have an automatic back-up in case of mains failure and you can carry the unit in and around the house. Mains operated use 1 Connect the the power adapter cord (B-14) to the power supply jack (DC 3.6V / 200mA - B-3) of the parent unit. 2 Connect the AC power adapter (B-14) to a wall outlet. . The parent unit is now ready for mains operated use! Battery operated use 1 Open the battery compartment by sliding the cover (B-12) downwards. EN Getting your baby monitor ready for use 2 Insert two 1,5V, AAA size batteries (batteries are not supplied; we recommend Philips Alkaline batteries), noting the + and – configuration inside the battery compartment. 3 Put the battery compartment cover (B-12) back in place. Close the compartment by sliding the cover (B-12) upwards until it clicks in position. . The parent unit is now ready for battery operated use! Notes: – When the units are switched off, in case of battery operated use, the batter...
Эта инструкция также подходит к моделям:Радионяни - SCD487/84 (1.78 mb)