-12 Channel Scan In the scan mode, the radio alternately monitors each Channel until it receives a call. You can scan all Channels, or you can temporarily lock out individual Channels from scanning as desired. 1. Press Sto begin scanning. The SCAN indicator begins to flash. 08 SCAN 2. The radio stops on any Channel that receives a call, and you hear the caller. When the transmission stops, the radio resumes scanning after a brief delay. 3. To disable scanning, press S. Dual Watch If your radio h

. .. . . . . . . . . . . . 4 SAFE DRIVING RECOMMENDATIONS FOR USERS OF MOBILE RADIOS* . ... . ... . ... . ... . . 5 OPERATING PROCEDURES ... . ... . ... . . 5 INTRODUCTION . . ... . ... . ... . ... . . 6 CONTROLS, INDICATORS, AND DISPLAYS . . . . 7 CONTROLS .. . ... . ... . ... . ... . . 7 CONTROLS AND INDICATORS . . . . . . . . 8 DISPLAYINDICATORS ... . ... . ... . . 10 DISPLAY ALPHA INDICATORS . . . . . . . . . 11 OPERATING THERADIO .. . ... . ... . . 12 TURNING THE RADIO ON . . ... . ... . .

. . . . . . .9 Attaching/Removing the Battery . . . . . . . . . . . . 9 Installing the Antenna .. .. .. .. .. .. .. .. . 10 Attaching the BeltClip .. .. .. .. .. .. .. .. 10 Operation .. .. .. .. .. .. .. .. .. .. .. . 11 LCD Display . . . . . . . . . . . . . . . . . . . . . . 11 Transmit/ReceiveIndicator . . . . . . . . . . . . . . 11 Applying Power and Setting the Volume . . . . . . . 12 Receive . . . . . . . . . . . . . . . . . . . . . . . . 12 Channel Scan . . . . . . . . . . . . . . . . . .

2. Press the CLR button to monitor the channel. Noise will be heard if there is no activity on the channel. This function is also useful for setting the desired volume level. 3. You will hear the voice message automatically if a valid message is received by your radio. SENDING A MESSAGE 1. Make sure the radio is turned ON, and the proper Channel and System have been selected. 2. Press and hold the CLR switch and then adjust the VOLUME controls for the desired listening level. Release CLR switch.