Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Contact an authorized Kenwood dealer for details and complete list of all accessories and options. Specifications Model TK-980 TK-981 Model TK-980 TK-981 GENERAL RECEIVER (Measurements made per TIA/EIA-603) Frequency Range Sensitivity (12 dB SINAD) 0.25 .V Type 1 (RX) 851~870 MHz 935 ~ 941 MHz Selectivity* 75 dB 68 dB Type 2 (TX) 806 ~ 825 MHz, 896 ~ 902 MHz, Intermodulation Distortion 70 dB 65 dB Type 3 (Talk Around) 851 ~ 870 MHz 935 ~ 941 MHz Spurious Response* 80 dB Systems Max. 32 Audio Output 4 W with less than 5% distortion Group Max. 250 per system Channel frequency spread 19 MHz 6 MHz Channels TRANSMITTER (Measurements made per TIA/EIA-603) LTR® Mode Max. 600 (Conventional) Max. 250 RF Power Output 15 W Spurious & Harmonics 60 dB (PLL step: 12.5 kHz) Modulation 16KOF3E 11KOF3E PLL Channel Spacing 25 kHz 12.5 kHz Operating Voltage 13.6 V DC ± 15 % FM Noise 45 dB 40 dB Current Drain Audio Distortion Less than 3% Less than 5% Standby Less than 0.4 A Microphone Impedance Low Impedance Receive Less than 1.0 A Channel Frequency Spread 64 MHz 45 MHz Transmit Less than 7.0 A Duty Cycle Transmit: 20% * Typical specifications Kenwood follows a policy of continuous advancement in development. Operating Temperature -22° F ~ +140° F For this reason specifications may be changed without notice. Range (-30° C ~ +60° C) FleetSync® is a registered trademark of Kenwood Corporation. Frequency Stability ±0.00015% LTR® is a registered trademark of Transcrypt International. (-22° F ~ +140° F) Antenna Impedance 50 . Dimensions (W x H x D) 5-1/2 x 1-1/2 x 5-3/4 in. (140 x 40 x 145 mm) Weight (net) 2.07 lbs. (940 g) FCC ID ALH24563110 ALH24572110 IC Certification 282195546A 282195545A Applicable MIL-STD footnotes from Front: Standard MIL 810C MIL 810D MIL 810E MIL 810F 1 Trunked Format: 32 Systems max. (prog. for LTR® or Conventional), Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures 250 Groups per system max (limited per repeater channels programmed). Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 2 DTMF Encode includes PTT ID, Emergency ANI, Manual Encode (KMC-28A DTMF mic required), Auto-Dial (32 numbers); DTMF Decode includes Stun (dead beat disable), primary/secondary Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II selective call with call alert and transpond. High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II Temperature Shock Solar Radiation 503.1/Procedure I 505.1/Procedure I 503.2/Procedure I 505.2/Procedure I 503.3/Procedure I 505.3/Procedure I 503.4/Procedure I, II 505.4/Procedure I 3 Ignition sense requires KCT-34 ACC cable & KCT-18 Ignition sense cable options. 4 Public Address / Horn Alert Option- requires KAP-1 PA/HA Unit and Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 KCT-34 ACC Cable options. 5 KPG-49D required: Windows® 98/ ...
Эта инструкция также подходит к моделям:Рации - FleetSync TK-981 (729.46 kb)