Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Hauppauge, NY 11788 Form No. 128-5376 Owner's Manual Model : FR-100 Two Way Family Radio Customer Service 1-800-225-6074 CONGRATULATIONS ON YOUR SELECTION OF THE FR-100 (FAMILY RADIO) It is one of the most sophisticated and reliable two-way Family radios available. BEFORE OPERATING YOUR FR-100 (FAMILY RADIO) READ THIS MANUAL CAREFULLY. FCC WARNING Replacement or substitution of transistors, diodes or other parts of a unique nature, with parts other than those recommended by manufacturer, may cause violation of the technical regulations of Part 95 of FCC Rules, or violation of type acceptance requirements of Part 2 of the rules. 2 I FEATURES Your FR-100 Family Radio is a portable, easy-to-use, two-way radio that you can cany almost anywhere. It is skillfully constructed to give you reliable communication for many different applications. The FR-100 is ideal for use around the house, in your car or boat, on hunting and camping trips, on the ski slope, at the mall or at your business for security patrols or warehouse communications. Advanced PLL circuitry achieves a new technique for generating all the required frequencies with fewer crystals. The result is much tighter frequency control aod superior reliability. I PERFORMANCE Your transceiver will achieve its maximum operating range when communicating with another transceiver in a flat open area with no trees or buildings obstructing its signal. Range may be up to two miles under such conditions. Obstacles, such as building, trees, or mountains will tend to reduce the transceiver's effective range. 3 I FUNCTION AND LOCATION OF THE CONTROLS 4 1. POWER ON/OFF-VOLUME CONTROL: Rotate clockwise to turn “ON" and increase listening volume level. Rotate counterclockwise to decrease volume or turn the transceiver “OFF". 2. PUSH-TO-TALK BUTTON: Press to transmit, and release to receive. 3. MONITOR (M) BUTTON: Press to monitor channel activity. 4. BELT CLIP 5. BATTERY COMPARTMENT 6. SPEAKER 7. MICROPHONE 8. CALL BUTTON: Press and hold to send a ringing sound to all radios turned to the same channel. 9. B ATT LOW LED: Illuminates when battery charge is low. 10, TX LED: Illuminates while radio is transmitting. 11. ANTENNA 12-1. MICROPHONE JACK: For use with an external microphone. 12-2. SPEAKER JACK: For use with an external speaker. 5 I BATTERY INSTALLATION Your radio requires four “AAA” alkaline cells or four rechargeable “AAA” nickel cadmium cells. Alkaline batteries will provide your transceiver’s best range and preformance. Remove the battery cover by releasing the clasp at the bottom of the unit and lifting the cover from the battery compartment. Observe the polarity symbols inside the battery tray when installing the batteries. CAUTION: Incorrect battery installation can damage the unit. 6 I HOW TO OPERATE YOUR RADIO TO RECEIVE 1. Turn the power on. 2. If the “Battery Low” indicator, is on charge or replace the batteries. 3. Adjust the volume control to the desirable listening level by pressing and holding the monitor button while turning the volume control knob. TO TRANSMIT 1. Turn the power on. 2. If the “Battery Low” indicator is on, charge or replace the batteries. 3. To transmit, press the Push-to Talk button. Speak slowly and clearly in a normal voice, approximately 2-3 inches from the microphone. A built-in modulation control circuit will automatically adjust the microphone input level. There’s no need to speak loudly. 4. To receive, release the Push-to-Talk button TO SET THE DESIRED CHANNEL 1. Remove the battery cover. 2. Remove the battery on the far right. 3. Below this battery is a bank of four Dip Switches. 4. Adjust the switches as per the chart on page 8. NOTE: The up position is toward the top of the radio 7 Channel # Dip Switch 1 2 3 4 1 Up Up Up Up 2 Down Up Up Up 3 Up Down Up , Up 4 Down Down Up Up 5 Up Up Down Up 6 Down Up Down Up 7 Up Down Down Up 8 Down Down Down Up 9 Up Up Up Down 10 Down Up Up Down 1! Up Down Up Down 12 Down Down Up Down 13 Up Up Down Down 14* Up Down Down Down 14* Down DoWn Down Down 14* Down Up Down Down ♦Channel 14 will be selected with any of these three settings. 8 I SPECIFICATIONS Channels.............................................................................................14 Output power.....................................................................500 mw ERP Battery Life: (Alkaline)...............................................................30 Hours (1500mA) (NiCd)......................................................................13 Hours (600mA) Power Source (Alkaline)..........................................................4.5 V DC Frequencies: CHANNEL FREQUENCY CHANNEL FREQUENCY I 462.5825 MHz 8 487.5625 MHz 2 462.5875 MHz 9 487.5875 MHz 3 462.6125 MHz 10 487.6125 MHz 4 462.6375 MHz 11 467.6375 MHz 5 462.6325 MHz 12 487.5825 MHz 6 462.6675 MHz 13 467.6875 MHz 7 462.7125 MHz 14 467.7125 MHz Specifications ...