Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
The correct position for each label may be determined by referring to the Figure and Item numbers shown. LABEL DANGER KEEP HANDS LABEL EAR EYE BREATHING LABELENGINEOVERHEAT DANGER FLYING DEBRIS AND FEET AWAY ITEM# 48 P/N 830503 ITEM#49 P/N 811215 ITEM #19 P/N 810736 ITEM #3 P/N 400424 LABEL READ OWNERS MANUAL LABEL EXPLOSIVE FUEL LABEL CAUTION ITEM #15 P/N 830301 ITEM # 81 P/N 400268 ITEM #47 P/N 830138 ENGINE LABELS BRIGGS & STRATTON (VANGUARD) HONDA BRIGGS AND STRATTON THROTTLE CONTROLS TR Units have frame mounted throttle controls as shown here. Briggs Vanguard Units have an engine mounted throttle control. Engine Stop Switch Stop position Start position Part No 811202 Form No F021307B 7 Part No 811202 8 Form No F021307B HTR/TR Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one carton and is completely assembled except for the exhaust elbow, nozzle, handle loop for nozzle, hose booms, hose bands, hose coupler, hose clamps and related hardware. PUT OIL IN ENGINE BEFORE STARTING READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box. Boxing Parts Checklist Exhaust Elbow 811191 Boom Square Arm 810875 Boom Pivot WA 810870 Band Hose Boom 8" (203mm) TR 810880 Qty. 2 Band Hose Boom 10" (254mm) HTR 810868 Qty. 2 Coupler Weld Assy. 8" (203mm) TR 811170 Coupler Weld Assy. 10" (254mm) HTR 811179 Hose Clamps 8"(203mm) TR 810566 Qty. 2 Hose Clamps 10" (254mm) HTR 810706 Qty. 2 Handle Nozzle 811020 TR and HTR Nozzle 8"(203mm) TR 811007 Nozzle 10" (254mm) HTR 811005 PARTS BAG & LITERATURE ASSY Warranty card P/N- 400972, Owner’s Manual P/N-811202, Declaration of Conformity P/N-811204, Literature HTR/TR Accessories 811208. TR MODELS Honda 13 HP B&S 11 HP HTR MODEL B&S 18 HP Vanguard- twin Hose 8”x12.5’ TR P/N 810523 Hose 10"x 12.5' HTR P/N 810705 Handle Loop Nozzle P/N 811019 Parts Bag & Literature Assy P/N 811128 79 4 52 5 6 80 55 Washer 5/16 Fender 8172020 qty. 4 Washer 5/16 SAE 8172008 qty. 6 Nut Lock 1/4-20 8160001 qty. 4 Nut Lock 5/16-18 8160002 qty. 3 Washer 5/16 Flat Cut 8171003 qty. 1 Screwcap 5/16-18x 1 1/2 8041030 qty. 3 Screwcap 1/4-20x 1 3/4 8041009 qty. 2 Chain Loop Assy 810878 qty. 2 54 Parts Bag Hardware HTR/TR Owner’s Manual ASSEMBLY OPERATION 1. ASSEMBLE exhaust elbow (item 10), to main unit and firmly tighten knobs (item 90), that are preassembled to main unit. 2. SECURELY ATTACH unit to tailgate of a truck or to a trailer, so that the exhaust discharges into an enclosed container. 3. ATTACH hose to hose coupler (item 24), using hose clamp (item 60) NOTE: This unit is equipped with a directional hose. Assemble hose so that interior hose material seams face toward unit. 4. ASSEMBLE hose coupler to housing of main unit and securely tighten knob (item 13), that is preassembled to housing front plate. 5. ASSEMBLE nozzle handle loop (item 82), to nozzle handle using screw (item 80), washer (item 6) and lock nut (item 5). Adjust handle loop to desired height and angle and securely tighten in place. 6. ASSEMBLE nozzle handle (item 78), to nozzle (item 77), using screws (item 80), washers (item 79), washers (item 4) and lock nuts (item 5). 7. ATTACH assembled nozzle to hose using hose clamp (item 60). Before tightening hose clamp, position nozzle handle upward when hose is stretched to prevent twisting load on hose assembly during operation. 8. ASSEMBLE tube square boom (item 51), to boom pivot (item 50), using chain loop assembly (item 54), washers (item 4) and lock nut (item 52). 9. ASSEMBLE remaining chain loop assembly (item 54), to end of tube square boom (item 51) using washer (item 4) and lock nut (item 52). 10. SLIDE boom assembly into square tube on front of housing. 11. ASSEMBLE hose bands (item 56) around hose and onto chain loop assemblies on boom assembly using screws (item 55) and lock nuts (item 52) (see ADJUSTING HOSE BOOM on page 10). HTR/TR Owner’s Manual ASSEMBLY OPERATION 1. ASSEMBLE exhaust elbow (item 10), to main unit and firmly tighten knobs (item 90), that are preassembled to main unit. 2. SECURELY ATTACH unit to tailgate of a truck or to a trailer, so that the exhaust discharges into an enclosed container. 3. ATTACH hose to hose coupler (item 24), using hose clamp (item 60) NOTE: This unit is equipped with a directional hose. Assemble hose so that interior hose material seams face toward unit. 4. ASSEMBLE hose coupler to housing of main unit and securely tighten knob (item 13), that is preassembled to housing front plate. 5. ASSEMBLE nozzle handle loop (item 82), to nozzle handle using screw (item 80), washer (item 6) and lock nut (item 5). Adjust handle loop to desired height and angle and securely tighten in place. 6. ASSEMBLE nozzle handle (item 78), to nozzle (item 77), using screws (item 80), washers (item 79), washers (item 4) and lock nuts (item 5). 7. ATTACH assembled nozzle to hose using hose clamp (item 60). Before tightening hose clamp, position nozzle handle upward when hose is stretched to prev...