Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Dispose of packaging that is no longer required at an appropriate recycling point. Old appliance Old appliances still contain many valuable materials. Therefore, please take appliances that have reached the end of their service life to your retailer or recycling centre so that they can be recycled. For current disposal methods, please enquire at a retailer or your local council. Disposal of filters and dust bags Filters and dust bags are manufactured from environmentally friendly materials. Provided they do not contain substances that are not permitted in household waste, you can dispose of them with your normal household waste. 5 Your vacuum cleaner 1 Adjustable floor tool 2 Telescopic tube with adjusting sleeve 3 Hose handle 4 Flexible hose 5 Upholstery nozzle 6 Crevice nozzle 7 Parking aid 8 Power cord 9 Exhaust filter* 10 On/off button with electronic suction regulator 11 Motor protection filter, washable 12 Storage aid (on underside of unit) 13 Dust bag 14 Dust bag compartment lid 15 Carrying handles (on the front and back) 16 Dust bag change indicator 17 Exhaust grille *Dependent on model purchased 4 17 16 15 14 13 12 7 8 1 10 11 9* 2 5 3 6 6 CLICK! Setting up Before using for the first time Push the handle onto the flexible hose until it engages. CLICK! Push the crevice nozzle and upholstery nozzle into the accessories holder as illustrated. Push the flexible tube adapter into the air intake opening in the vacuum cleaner lid until it engages 7 Holding the power cord by the plug, pull out the required length and plug the plug into the mains socket. Insert the telescopic tube into the floor tool adapter. Connect together the handle and telescopic tube. Release the telescopic tube by moving the sliding switch in the direction of the arrow and adjust the tube to the required length. Setting up 8 Setting up Switching on/off Your appliance is fitted with a pop-out control button. To switch on the appliance, press the control button in the direction of the arrow down to the stop and release. This will release and extend the controller. To switch off the appliance, press the control button in again down to the stop. This will leave the control button retracted in the appliance. Controlling the suction level The required suction level can be set to any level required by turning the control knob in the direction of the arrow. Low suction range => For vacuuming delicate fabrics, e.g. curtains. Medium suction range => For daily vacuuming of lightly soiled floors. High suction range => For vacuuming durable floor coverings, hard floors and for heavily soiled surfaces. 9 Vacuuming with accessories Attach the nozzles to the tube or handle as required: Crevice nozzle for vacuuming crevices and corners, etc. Upholstery nozzle for vacuuming upholstered furniture, curtains, etc. Vacuuming Adjusting the floor tool: Rugs and carpets => hard floors => Caution! Floor tools are subject to a certain amount of wear, depending on the type of hard floors you have (e.g. rough, rustic tiles). Therefore, you must check the underside of the floor tool at regular intervals. Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The manufacturer does not accept any responsibility for damage caused by worn floor tools. Remove the upholstery nozzle and crevice nozzle from the accessories holder as illustrated. 10 Vacuuming CLICK! After use, push the crevice nozzle and upholstery nozzle back into the accessories holder as indicated. You can use the parking aid on the back of the vacuum cleaner if you wish to stop vacuuming for a short time. Once you have switched off the vacuum cleaner, slide the catch on the floor tool into the recess on the rear of the appliance. The appliance can also be carried using the carrying handle when vacuuming steps, for example. 11 Unplug the vacuum cleaner. Tug the power cord briefly and let go. The cable then rewinds automatically. 16 When the work is done To remove the flexible hose, press the two lugs together and pull the tube out. To store/ transport the vacuum cleaner, use the storage aid on the underside of the vacuum cleaner. Stand the vacuum cleaner up on its end. Slide the catch on the floor tool into the groove on the underside of the appliance. 12 Changing the dust bag and filters Replacing the dust bag If the dust bag change indicator is completely yellow when the floor tool is lifted from the floor and the highest suction power is selected, the dust bag must be changed, even if it is not yet full. In this case it is essential to change the dust bag due to the type of material it contains. First check that the nozzle, suction pipe and flexible hose are not blocked, as this would also lead to the dust bag change indicator being triggered. The handle can easily be detached from the hose to remove blockages. Opening the lid Press the control button down to the stop and leave it retracted in the appliance. !Caution: Only open the lid...