Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Do not use the vacuum cleaner if it is damaged. Unplug the power cord from the mains if a fault is detected. For safety reasons, only authorised after-sales service personnel are permitted to carry out repairs and fit replacement parts to the vacuum cleaner. Protect the vacuum cleaner from outside weather conditions, moisture and sources of heat. The vacuum cleaner is not suitable for use on building sites. => Vacuuming up building rubble could damage the appliance. Switch off the appliance when it is not in use. At the end of its life, the appliance should be rendered unusable, then disposed of in an appropriate manner. Plastic bags and films must be kept out of the reach of children before disposal (risk of suffocation). do not pour any flammable substances or substances containing alcohol onto the filters (filter bag, motor protective filter, exhaust filter, etc.). en Disposal information Packaging The packaging is designed to protect the vacuum cleaner from being damaged during transportation. It is made of environmentally friendly materials and can be recycled. Dispose of packaging that is no longer required at an appropriate recycling point. Used vacuum cleaners Used vacuum cleaners still contain many valuable materials. Therefore, please take your used vacuum cleaner to your retailer or recycling centre to be recycled. For current disposal methods, please enquire at your retailer or your local council. Disposal of filters and dust bags Filters and dust bags are made from environmentally friendly materials. As long as they do not contain substances that are not permitted to be disposed of in the household rubbish, you can dispose of them with your normal household rubbish. ! ! Please note The mains socket must be protected by at least a 16 amp fuse. If a fuse should blow when you switch on the appliance, this may be because other electrical appliances which have a high current draw are connected to the same power circuit. To prevent the fuse from blowing, select the lowest power setting before switching the appliance on, and increase the power only once it is running. Fold out the picture pages. Setting up Figure 1 a) Insert the flexible hose adapter into the air intake opening and allow it to engage. Make sure that the connecting part of the flexible hose adapter is plugged into the vacuum cleaner socket. b)To remove the flexible hose, press the release buttons and pull the hose out. Figure 2 . Push the handle straight into the telescopic tube until it engages. . Make sure that the connecting part of the telescopic tube is inserted into the correct recess in the handle. . To release the connection, press the unlatching sleeve and pull the handle out. Figure Push the telescopic tube into the connecting piece of the floor tool until it engages. Press on the locking collar and pull out the telescopic tube to disconnect. 3* Figure 4 . Push the telescopic tube straight into the connecting piece of the ELECTROMATIC® brush until it engages. . Make sure that the connecting part of the telescopic tube is inserted into the correct recess in the connecting piece of the ELECTROMATIC® brush. Electrical contact with the vacuum cleaner is made once the connecting part is engaged. . To release the connection, press the unlatching sleeve and pull the telescopic tube out. Figure To adjust the length of the telescopic tube, press the sliding switch in the direction of the arrow and adjust the tube to the required length 5 Figure Take the mains plug, pull the power cord to the required length and insert the plug into a socket. 6 Figure 7 Press the ON/OFF button in the direction of the arrow to switch on your vacuum cleaner. en Vacuuming Figure 8 a) If your appliance is fitted with a constant suction system, the power of the appliance is automatically adjusted to the fill level of the filter bag. The following power settings can be selected: . Low suction range: For vacuuming delicate fabrics, e.g. curtains. . Moderate suction range: For daily vacuuming of lightly soiled floors. . High suction range: For vacuuming durable floor coverings, hard floors and heavily soiled surfaces. b)Air power: For heavily soiled surfaces and coarse dirt deposits. The appliance vacuums with the maximum possible suction. Figure While the vacuum cleaner is in use, the ELECTROMATIC® brush can be switched on or off by pressing the switch button. 9 Figure 10 . Move the ELECTROMATIC® brush slowly forwards and back to achieve optimum cleaning effects. . Only brush the carpet threads in the direction of the arrow. Figure 11 . The motor switches off automatically if the brush rollers are blocked during operation by vacuuming up awkward foreign objects or if strands of carpet are wrapped around it. Switch off the vacuum cleaner and unplug the power cable before carrying out any maintenance work. . Cut through strands of carpet and hairs wound round the rollers using scissors. Vacuum strands and hairs using a crevice nozzle. Figure 12 Adjusting the f...
Эта инструкция также подходит к моделям:Пылесосы - VSZ61290/04 (9.04 mb)