Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The cylinder folds forward (see Fig. 17). . Turn the dust separator twist-lock cover anticlockwise and remove it from the dust separator. . Clean the cylinder and cylinder cover as required. Figure 27 . Replace the dust separator twist-lock cover and lock into position by turning in a clockwise direction. . Push the cylinder back into position, closing the vacuum cleaner (you will hear a positive click) (see Fig. 23). Figure 28 . The cylinder can also be removed from the vacuum cleaner to clean the joint in the event of malfunctions caused by large objects being vacuumed up. . When replacing the joint, you must hear it engage. ! CAUTION: The inside of the separator may become scratched with use and start to look opaque. This does not, however, affect the performance of the vacuum cleaner in any way, i.e. it will continue to function as normal. Care Always switch off the vacuum cleaner and disconnect the power cord from the mains before cleaning the appliance. The vacuum cleaner and plastic accessories can be cleaned with a commercial plastic cleaner. ! Do not use a scourer, glass-cleaning agent or all-purpose cleaning product. Never immerse the vacuum cleaner in water. The dust compartment can, if necessary, be cleaned with a second vacuum cleaner or simply wiped with a dry cloth or dusting brush. Subject to technical modifications. en Frequently asked questions What kind of dirt can be vacuumed using the vacuum cleaner? All kinds of household dirt can be vacuumed using the SX1. When vacuuming fine particles, note that the motor protection filter, foam filter and fluff filter must be cleaned at regular intervals to guarantee the optimum function of the vacuum cleaner. Should the dust container be emptied after each use of the vacuum cleaner? The dust container should be emptied after each use for hygiene reasons, or at the latest when the maximum level (see the mark) is reached. How often should filter cartridges and motor protection filters be cleaned/rinsed out? Ideally, the filters should be cleaned after each use, especially after vacuuming fine particles, either by tapping or rinsing, depending on the level of dirt. The motor protection filter, foam filter and fluff filter must be cleaned at the latest when the maximum level (see max. marking on dust container) has been reached. How often should the washable exhaust filter be cleaned/rinsed? The washable exhaust filter should be cleaned regularly for hygiene reasons by tapping the dust out and must be rinsed through at least once every 6 months (or washed in the washing machine at 40°C). What is the best way to transport my vacuum cleaner? The SX1 can be transported easily using the ergonomic carrying handle, e.g. for vacuuming the stairs. It is best to hold/carry the tube with the floor tool in the other hand. Troubleshooting small problems Problem Cause Solution Suction power becomes noticeably weaker The filter cartridge / motor protection filter is heavily soiled. Clean the motor protection filter, fluff filter and foam filter by tapping out the dust or rinsing (Fig. 17, 21-23). Caution: After rinsing, replace the motor protection filter, foam filter and fluff filter only once they are completely dry (after approximately 24 hours). The nozzle is blocked Vacuum the nozzle, e.g. using the crevice nozzle The hose / telescopic tube is blocked. Slide the telescopic tube together and separate the suction pipe sections. Loosen and remove the blockage. The hose / handle is blocked Separate the hose from the vacuum cleaner and handle Loosen and remove the blockage. The dust separator is blocked Remove the twist-lock cover from the dust separator, loosen and remove the blockage. Clean the dust separator with a damp or dry cloth if necessary. Replace ...
Эта инструкция также подходит к моделям:Пылесосы - VSX12000/03 (3.28 mb)
Пылесосы - VSX12000CH/03 (3.28 mb)
Пылесосы - VSX12022/03 (3.28 mb)