Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 872.54 kb Название файла: Язык инструкции:

Only use Philips s-bag™ double-layer paper dustbags (type FC8021), or the cotton dustbag provided (some versions only). . Never use the vacuum cleaner to suck up water or any other liquid. Never suck up ashes until they are cold. . When the vacuum cleaner is used to suck up fine dust, the pores of the dustbag may become clogged, causing the passage of air through the dustbag to become obstructed. As a result, the dustbag-full indicator will indicate that the dustbag needs to be replaced, even though the dustbag is not full at all. . Never use the appliance without the Motor Protection Filter.This could damage the motor and shorten the life of the appliance. Connecting accessories Hose 1 To connect the hose, push it firmly into the appliance (you will hear a click). 2 To disconnect the hose, push the buttons on the swivel and pull the hose out of the appliance.(fig.1) Tube There are two types of coupling systems. Depending on the type, this appliance is equipped with one of them. See the systems displayed in the following pictures. Conical coupling (specific types only) . Connect the tubes to the handgrip by inserting the narrow section into the wider section while turning it a little.(fig.2) To disconnect the tubes from the handgrip, pull while turning a little. Button coupling (specific types only) . Connect the tube to the handgrip by pressing the spring-loaded lock button on the handgrip and inserting the handgrip into the tube. Fit the spring-loaded lock button into the opening in the tube ('click').(fig.3) . To disconnect the tube from the handgrip, press the spring-loaded lock button and pull the handgrip out of the tube. . Use the same method to connect and disconnect the other accessories. Telescopic tube (specific types only) 1 Adjust the tube to the length you find most comfortable during vacuum cleaning.(fig.4) Reach & Clean nozzle . The Reach & Clean nozzle can be used on either carpets or hard floors.The nozzle can be turned 360 degrees to 4 different positions, allowing you to also vacuum clean hard-to-reach places in an easy way.When the nozzle is positioned lengthwise, the suction power is concentrated at the front side of the nozzle.(fig.5) . To adjust the nozzle to the type of floor and the area to be cleaned, put your foot on the indicated spot and then turn the tube until the nozzle is in the required position.(fig.6) 1 With the nozzle positioned breadthwise and the brush strip folded out, you can clean large hard floor areas.Turn the nozzle until the brush strip pops out of the nozzle housing and the nozzle is positioned breadthwise.(fig.7) 2 With the nozzle positioned lengthwise and the brush strip folded out, you can vacuum clean small hard floor areas.Turn the tube 90 degrees anti-clockwise until it is positioned lengthwise with the brush strip still folded out of the nozzle housing.(fig.8) 3 With the nozzle positioned breadthwise and the brush strip folded in, you can vacuum clean large soft floor areas.Turn the tube 90 d...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: