Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 17.17 mb Название файла: Язык инструкции:

When the filter-cleaning process is finished, you hear a beep. , using the autoClean button during vacuuming (specific types only) You can also press the AutoClean button during vacuum cleaning. When you do this, the motor stops running and the filter-cleaning process star ts. During the filter-cleaning process, the appliance does not suck up dir t. When the filter-cleaning process is finished, the motor automatically star ts running again and you can continue vacuum cleaning. 14 English 15 sec.15 sec. reminder to clean the filter cylinder You have to clean the filter cylinder after each vacuuming session.This prevents the filter cylinder from clogging and helps maintain optimal suction power. - If you fail to clean the filter cylinder a number of vacuuming sessions in a row, the filter light flashes for 15 seconds. Cleaning and maintenance Cleaning the dust bucket and filter cylinder unit Always unplug the appliance before you empty the dust bucket. The dust bucket is not dishwasher-proof. Empty the dust bucket as soon as the dust level has reached the round disc of the filter cylinder case. Switch off the appliance and remove the mains plug from the wall socket. To disconnect the hose, press the release button (1) and pull the hose out of the appliance (2). To unlock the cover, press the cover release button. Swing open the cover. Lift the dust bucket out of the appliance. 1 2 3 4 5 Press the release button for the filter cylinder unit on the bucket handle (1) and remove the filter cylinder unit (2). 6 7 Hold the dust bucket over a dustbin and empty it. Clean the dust bucket with cold tap water and some washing-up liquid. 8 If you want to clean the filter cylinder unit, remove the filter cylinder from the filter cylinder case. Turn the handle on top of the filter cylinder anticlockwise (1) and lift the filter cylinder out of the case (2). 9 To clean the filter cylinder, gently tap it against the dustbin to release all fine dust from the filter cylinder. -- If you persistently fail to clean the filter cylinder after every use, the filter cylinder clogs up with dirt and the suction power decreases over time. If this happens, unclog the filter cylinder in the following way: 1 Hold the filter cylinder over a dustbin. 2 Clean it with the cleaning brush supplied. Gently brush from the top of the filter downwards along the ribs of the filter. Only use the cleaning brush that comes with the appliance. Other brushes may damage the filter cylinder. The filter cylinder is not waterproof and cannot be cleaned with water, cleaning agents or flammable substances. Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power. 10 To clean the filter cylinder case, use a dry cloth or the cleaning brush supplied. You can also clean it with cold tap water and some washingup liquid. -- Do not clean the filter cylinder case with the filter cylinder in it under the tap, as the filter cylinder is not waterproof. English 15 11 Put the filter cylinder back into the filter cylinder case (1) and turn it clockwise to fix it (2) (‘click’). Make sure that the filter cylinder case is dry before you reinsert the filter cylinder into it. 12 Put the filter cylinder unit back into the dust bucket (‘click’). Make sure that the dust bucket is dry before you reinsert the filter cylinder unit. Cleaning the motor protection filter Clean the permanent motor protection filter every two months. 1 Unplug the appliance. 2 Take the motor protection filter out of the appliance and clean the filter by tapping the dust out of it over a dustbin. If you want to clean the motor protection filter more thoroughly, you can rinse it under a cold tap. Do not use washing-up liquid, flammable substances or any other cleaning agent to clean the motor protection filter. Make sure that the motor protection filter is completely dry before you put it back into the filter compartment. 3 Press the clean filter firmly back into the filter compartment to ensure that it is properly placed. Washable Ultra Clean Air HEPA 13 filter Note: To guarantee optimal dust retention and performance of the vacuum cleaner, always replace the HEPA filter with an original Philips filter of the correct type (see chapter ‘Ordering accessories and filters’). Clean the washable HEPA 13 filter every 6 months. You can clean the washable HEPA 13 filter max. 4 times. Replace the filter after it has been cleaned 4 times. Note: Do not clean the HEPA 13 filter in the washing machine, but follow the procedure below. 1 Unplug the appliance. 16 English English 17 2 Grab the release tabs of the HEPA filter cover to open and remove the filter cover. 3 Take out the washable HEPA 13 filter. 4 Rinse the pleated side of the HEPA 13 filter under a warm slow- running tap. -Hold the filter in such a way that the pleated side points upwards and the water flows parallel to the pleats. Hold the filter at an angle so that the water washes away the dir t inside the pleats. -...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: