Оценок - 1, средний балл: 5
(
)
)
|
Фото и характеристики LG V-K8701HTU |
Фрагмент инструкции
. . . P/NO : 3828FI5917H September. 2006 Printed in Korea CONTENTS SAFETY PRECAUTIONS ............................................................................................................... 3 CAUTIONS ..................................................................................................................................... 3 DESCRIPTION ................................................................................................................................4 SPECIFICATIONS .......................................................................................................................... 4 DISASSEMBLY .......................................................................................................................... 5~6 TROUBLE SHOOTING GUIDE .................................................................................................. 7~9 SCHEMATIC DIAGRAM ............................................................................................................... 10 CIRCUIT DIAGRAM ...................................................................................................................... 11 EXPLODED VIEW .................................................................................................................. 12~15 REPLACEMENT PARTS LIST ............................................................................................... 16~17 -2 SAFETY PRECAUTIONS BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND OBSERVE EACH POINT CAREFULLY. 1. Motor filter(Air Cleaner) 1) This filter is reusable. 2) Never use the vacuum cleaner without filter. It may damage the motor. 3) When the light of body is on, wash the motor filter with water. 4) Even if the light is not on, wash the motor filter at least once 6 months. NOTE : Reusing of the motor filter. • Never wash the filter in a washing machine or in a dishwasher. • Never use hot water for washing the filter. • Reuse the filter after drying it completely in the shade for a day. • Do not dry near fire or direct sunray. 2. Exhaust filter(Washable HEPA filter) 1) This filter is reusable HEPA filter. 2) For clean air, this filter must be assembled. 3) Wash the exhaust filter with water once a year. 4) When the light of body is on, wash the exhaust filter with water. NOTE : Reusing of the exhaust filter. • Never wash the filter in a washing machine or in a dishwasher. • Never use hot water for washing the filter. • Reuse the filter after drying it completely in the shade for a half day. • Do not dry near fire or direct sunray. • Do not brush the filter. This will cause permanently damage allowing dust to by-pass the filter. • Do not wash the blue side of the filter. CAUTIONS 3. Avoid suction such materials as : 1) Liquid or wet dust : Clogs the ventilation holes, reduces the suction power significantly and harms the motor. 2) Inflammable liquids such as benzene, alcohol or solvents. 3) Burning objects such as cigarette butts. 4) Bulky objects such as vinyl, paper etc. 5) Sharp objects such as needles, pins, metal, glass particles etc. 4. Attachments • Nozzle : for cleaning wooden floor, the room floor and carpet. • Crevice Tool : for cleaning any crevice, inside corners or window frames. However, do not use the crevice tool more than 20 minutes because it may cause harm to the motor. • Dusting brush : for cleaning clothes curtains. 5. Close supervision is necessary when this vacuum cleaner is used by or near children. Children’s carelessness may cause damage to the cleaner or injure persons. 6. Air exhausted from the vacuum cleaner is normally warm. But if extraordinarily hot air is exhausted, check if the telescopic tube, hose or clean filter is clogged or not. 7. Electric shock could occur if used outdoors or on wet surfaces. BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT THE ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET. 1. Motor exchange 2. In case of exchanging other parts. 1) Separate the Body Cover and Body Base by refer to the exploded view. unfastening the screws. 2) After disconnecting the lead wires, replace the old motor with a new one. -3 -4- DESCRIPTION Cord Reel Button Dust Tank Body Cover Power Cord Flexible Hose Assembly Telesscopic Pipe Assembly Brush Assembly,Dust Carpet and Floor Nozzle Carpet Master SPECIFICATIONS • MODEL : REFER TO THE COVER PAGE • POWER SOURCE : ON RATING PLATE • POWER CONSUMPTION : ON RATING PLATE • POWER CONTROL : - MAIN : SLIDE KNOB CONTROL (F/HOSE) • CORD LENGTH : 10 m • HOSE LENGTH : 1.5 m • NET WEIGHT : 6.4 kg • PACKING WEIGHT : 10.5 kg • NET DIMENSION : 280 X 440 X 286 (W X D X H)mm • PACKING DIMENSION : 330 X 615 X 330 (W X D X H)mm • ATTACHMENTS HOSE.................................................................................. 1EA TELESCOPIC PIPE ASSEMBLY ..................................... 1EA NOZZLE ASSEMBLY........................................................ 1EA BRUSH ASSEMBLY, DU...