Оценок - 4, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
OPTION Remove waste matter completely if the inlet is blocked. ® Carpet Cleaning ® Floor Cleaning Remove waste matter completely when inlet is blocked. Turn the lock button to ‘UNLOCK’, and remove waste matter. OPTION For picking up pet hair and fibre on upholstery and bed linen. Turbine Brush To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the ‘LOCK’ position. Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging. Clogs on turbine keep brush from turning, thus need to be unclogged as follows. Brush for blanket OPTION For improved pick-up of pet hair and fibre on carpets. 5 1 4 5 6 2 3 3EMPTYING THE DUST BIN Once dust reaches the dust full mark, or sution is noticeably reduced during cleaning, empty the dust bin. Throw away dust into the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. Take the dust bin out by pressing the button. Separate the dust bin cover. NOTE You may rinse the dust bin with cold water. - Empty into a plastic bag (recommended for asthma/allergy sufferers) 6 4CLEANING THE DUST PACK NOTE When suction is noticeably reduced continuously, please empty the Dust Pack(4-2) as shown in the following illustration. 4-1. WHEN TO CLEAN THE DUST PACK Turn the vacuum power to 'MAX' - If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. HANDLE CONTROL If suction is noticeably reduced with the inlet floating 10cm above flat floor, clean it. 4-2 CLEANING THE DUST PACK 2 Remove the dust bin and dust pack as Remove the sponge and filter fromshown. the dust pack 4 Wash the sponge and the filter of the dust Let the sponge and filter dry in thepack with water. shade for more than 12 hours. 5 6 Put the sponge and filter into the dust Put the assembled dust packpack. into the main body. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. 7 8 Take out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. NOTE : Replacement filters are available at your local Samsung distributor. 5CLEANING THE MOTOR PROTECTION FILTER Press the fixed frame part at the back of the main body to remove. 6CLEANING THE OUTLET FILTER Remove and replace the blocked outlet filter. OPTION - MICRO FILTER OPTION - IF YOU HAVE A PROBLEM PROBLEM CAUSE REMEDY 0 Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is graduallydecreasing. Nozzle, suction hose or tube is blocked. Check for blockage and remove it. Cord does not rewind fully. Check that the cord is not twisted or wound unevenly. Pull the cord out 2-3m and push the cord rewind button. Vacuum cleaner does not pick up dirt. Crack or hole in hose. Ch...
Эта инструкция также подходит к моделям:Пылесосы - SC4330 (3.68 mb)
Пылесосы - SC4340 (3.68 mb)
Пылесосы - SC4350 (3.68 mb)
Пылесосы - SC4360 (3.68 mb)