Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Close attention is necessary when used by or near children. 4. Use only as described in this manual. Use only manufacturer's recommended attachments. 5. DO NOT use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized Panasonic Servicenter. 6. DO NOT pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. DO NOT run vacuum cleaner over cord. Keep cord away from heated surfaces. 7. DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord. 8. DO NOT handle plug or vacuum cleaner with wet hands. 9. DO NOT put any objects into openings. DO NOT use with any opening blocked: keep free of dust, lint, hair, and anything that may reduce air flow. 10. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. 11. DO NOT pick up anything that is burning or smoking, such as cigarettes, maíchüs, or hot ashes. 12. DO NOT use without dust bag and/or filters in place. 13. Turn off all controls before unplugging. 14. Use extra care when cleaning on stairs. 15. DO NOT use cleaner to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. 16. Connect to a properly grounded outlet only. See “Grounding Instructions”. SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This vacuum cleaner must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This vacuum cleaner is equipped with a cord having an equipment' grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the vacuum cleaner - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This vacuum cleaner is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in sketch A in the following Figure. Make sure that this vacuum cleaner is connected to an outlet having the same configuration as the plug. No adapter should be used with this vacuum cleaner. (A) Note: Before you plug in your Panasonic vacuum cleaner, make sure that the voltage indicated on the rating plate located at the back of the vacuum cleaner is the same as your local supply. -5- PARTS IDENTIFICATION FEATURE CHART (PANASONIC UPRIGHT VACUUM CLEANER) FEATURES POWER CORD WRAP EDGE CLEANING CORD LENGTH CARPET HEIGHT ADJUST OVERLOAD PROTECTOR Model MC-V100 120V. AC(60Hz) 3.3 Amps Yes Yes 30 Ft. Auto Yes SPECIAL FEATURES OF CLEANER ,------- • AUTOMATIC SELF ADJUSTINGNOZZLE ..... Your Panasonic upright vacuum cleaner is designed with an automatic self adjusting nozzle. No manual adjustments are required. The height of the nozzle is instantly and automatically adjusted to any carpet pile height. This self adjusting feature allows the nozzle to float evenly over all carpet pile surfaces. Nozzle Deep Pile Carpet. Shallow Pile Carpet - ййШМоУ OVERLOAD PROTECTOR The overload protector protects the motor from brush jamming and belt breakage. If the brush stops, the overload protector will stop the cleaner. To correct problem: Unplug electrical cord. Check brush area for excessive lint build-up or jamming. To reset: Press reset button on top of the nozzle. Plug in and turn on cleaner. -7 - TO OPERATE CLEANER A CAUTION DO NOT use outlets above counters. Damage fo Items in the surrounding areas could occur. Care should be taken when plugging the vacuum In as the ON/OFF switch may be ON. "> if; USING THE m CORD The power cord needs to be placed 1. There is a recessed area between the cord hook base and the handle that is designed to secure the power cord during vacuuming. Always push the power cord down into this recessed area to help keep the power cord from hanging near the nozzle and being damaged by the agitator. on the cord hooks when not in use. 2. Loosely wrap the power cord around the cord hook. Secure the plug head to the cord by pushing the power cord into the retainer on the plug head. Place the cord wrap around the center of the cord. Upper Cord Hook ON/OFF SWITCH 1. Plug the power cord into a 120V outlet. \ 2. To start the vacuum cleaner, depress the ^ ON/OFF switch. To stop the vacuum cleaner, I__J depress the ON/OFF switch a second time. - On/Off Switch | Vr V " HANDLE ADJUSTMENTS The handle may be lowered to any \\ 1 l'y position required. Just step on \\i 1/ . the handle release pedal as *—/ indicated by the illustration an...