Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
The powered brush roll at the Floor Nozzle is designed to enhance cleaning performance. The bristle pattern lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights and protects your carpet if you leave the Power Switch ON. When the machine handle is in the fully upright position, CarpetSaver™ automatically raises the brush off the carpet. Your PowerSteamer is equipped with a Measuring Cup for adding the proper amount of cleaning formula to the Tank-in-Tank™. Before using the machine, simply fill the Measuring Cup to the fill line with BISSELL Advanced Deep Cleaning Formula. Pour the formula into the Tank-in-Tank as shown on page 7. For convenience, the Measuring Cup stores on the back of the unit. This easy-to-use system is designed with a bladder inside to hold clean water. As you clean, the bladder will empty. Dirty water collects in the tank outside the bladder. NOTE: Make sure to add formula to the tank before filling it with water. Depress the Handle Release pedal to tilt back the handle. Lift the Tank-in-Tank handle. The handle locks the lid in place. Carry the Tank-in-Tank like a bucket to fill at the sink. Set the Tank down and rotate the handle forward to unlatch the Lid. Lift off and set the Lid aside. Tip: Deep cleaning carpeting and upholstery regularly can reduce dust and allergens in your home. Measuring Cup WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. The Basics: How Your PowerSteamer Works Power DirtLifter® PowerBrush (on select models) OFF ON ON OFF Power Switch To Fill The Tank-in-Tank™ 1. 2. 3. Tilt Handle Back Handle Release Lift and Carry Rotate Handle to Unlatch 1 2 3 ug310-5907_1692-1694_205.indd 4/18/05 9:19:55 AM ug310-5907_1692-1694_205.indd6 66 4/18/05 9:19:55 AM 7 4 5 6 Latched Lint Screen 1 2B 5 Tip: A special red float device in the tank will cause the cleaner to stop removing solution from the carpet. The motor sound will rise in pitch to let you know the dirty water tank is full. 2CLint Screen 7 4 5 6 Latched Lint Screen 1 2B 5 Tip: A special red float device in the tank will cause the cleaner to stop removing solution from the carpet. The motor sound will rise in pitch to let you know the dirty water tank is full. 2CLint Screen To Fill The Tank-in-Tank (Continued) 5. 4. 6. Using the Measuring Cup, pour BISSELL Deep Cleaning Formula into the mouth of the bladder. Fill to the bottom of the neck with hot tap water. Do not boil or microwave water. NOTE: Fill slowly to reduce sudsing. Replace the Tank Lid, matching the Lid and Tank edges. Rotate the handle to carrying position. Replace Tank in machine base, seating firmly in place. Rotate handle back down to latched position. When It's Time To Empty The Tank-in-Tank 1. 2. 3. 4. 5. NOTE: Remove the Tank-in-Tank, following steps 1 through 3 on page 6 . Pour out dirty water. After each use, remove and rinse the Lint Screen located on the Tank Lid. B. D. A. C. Remove Tank Lid, follow step 3 on page 6. Remove Lint Screen. Rinse under faucet to remove any debris. Insert Lint Screen back in Tank Lid. The screen will click into place. Replace Tank Lid. Refill with cleaning solution and clean tap water, follow steps 4-5 above. NOTE: When a cleaning job is complete, rinse out the Tank-in-Tank by running clean water between the bladder and the tank. Return the Tank-in-Tank to the machine, follow step 6 above. Refer to the Maintenance/Storage section on the next page for final cleanup. ug310-5907_1692-1694_205.indd 7 4/18/05 9:19:56 AM 8 This provides floor or upholstery cleaning with the turn of a dial. For carpet/floor cleaning make sure the dial is set to FLOOR CLEANING. For upholstery or fabric cleaning, select your cleaning tool, attach it to the Flex Hose, switch to Tools Settings and the PowerSteamer is ready to clean upholstery, fabrics and more* * Set the switch to FLOOR CLEANING when cleaning carpets, or set it to TOOLS/PRETREAT when using the Flex Hose attachments. Plan activities to give carpet time to dry. Remove easily moved furniture from the room (chairs, lamps, coffee tables, etc). Vacuum thoroughly to pick up loose debris and pet hair before using the PowerSteamer. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. NOTE: You may notice hair and debris deposits on carpet that were loosened by brushing action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up by hand and thrown away. Debris that deposits in the brush belt area should be cleaned out to keep Belts running free. Improves cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways: Set the ReadyTools™ dial to TOOLS/PRETREAT. Plug the PowerSteamer into a proper outlet and turn ON the Power switch. While pressing the trigger, slowly make several passes over the area to be cleaned. Caut...
Эта инструкция также подходит к моделям:Пылесосы - 1692 (1.03 mb)
Пылесосы - 1694 (1.03 mb)