Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Refer to fig 1 and 1A and the following list of parts. Note: Before disposing of packaging, be sure to remove all parts. If you have any problems, please call 1-800-54-HOW-TO (1-800-544-6986). 1. Hand vac (1) 2. Brush tool (1) 3. Crevice tool (1) 4. Bowl adaptor (1) (available on select models - check packaging for inclusion) 5. Beater Brush (1) (available on select models - check packaging for inclusion) Hand Vac Use Utilisation de l'aspirateur portatifUso de la aspiradora Fig. 2 On/Off SwitchInterrupteur Marche/ArretInterruptor de encendido/apagado Filter Access Door Volet d’acces au filtre Puerta de acceso al filtro Bowl Release Latch Loquet de blocage de l’enceinte ronde a salete Cerrojo de liberacionpara taza Large Dirt Chamber Grande enceinte a salete et enceinte a poussiere Camara grande para polvo y suciedad On Board Brush Tool Brosse integreeHerramienta con cepillos incorporada On Board Crevice Tool Suceur plat integreHerramienta para ranurasincorporada Dust Chamber Enceinte a poussiere Camara para polvo Fig. 3a Brush Tool Brosse Herramienta con cepillos Crevice Tool Suceur platHerramienta para ranuras Fig. 3b Fig. 4 Fig. 6a Fig. 5 Fig. 6b Fig. 6b Fig. 7 Fig. 8 Cord Retention Latch Loquet de retenue ducordon Cerrojo de retencion delc a b l e Using Your Hand Vac To turn the hand vac on, press down on the on/off switch (see fig. 2). To turn if off, press it again. CAUTION: The hand vacuum is a very powerful unit. Before plugging cord into outlet make sure the switch is in the OFF position (see fig. 2). Make sure to hold firmly when starting and in use. Using The Accessories VACUUM ACCESSORIES ACCESSORIES Two of the hand vac accessories are stored on board; the brush and crevice tool (see fig. 3a). See fig. 3b for insertion of these tools into the nozzle. The remaining accessories are shipped in the unit carton (see fig.1). Note: Make sure accessories are securely attached before use. BEATER BRUSH ACCESSORY (available on select models - check packaging forinclusion) CAUTION: Keep hair, loose clothing and all parts of body away from rotating brush. Your Hand Vac is supplied with an air driven Beater Brush. In order to maximize air suction when using the air driven beater brush: • Empty the dirt bowl frequently (see cleaning the hand vac / emptying the dirt bowl). • Keep the filter clean (see cleaning the hand vac / removing the filter). • Keep the beater brush free of hair and dirt (see cleaning the hand vac/cleaning the beater b r u s h ) . To attach beater brush insert accessory adapter into nozzle and the beater brush into theaccessory adapter (see Fig. 4). Note: Make sure accessories are securely attached before use. Cleaning The Hand Vac CAUTION: UNPLUG VACUUM BEFORE PERFORMING ANY MAINTENANCE. EMPTYING THE DIRT BOWL Pull the bowl lock button away from the bowl (see fig. 5). The door will swing open to allow for disposal. REMOVING / CLEANING THE FILTERS WARNING: Do not operate vacuum without filter in place. Your Hand Vac comes equipped with a main filter plus an exhaust filter. To remove the main filter grasp the unit (see fig. 6a). The filter access door is located underneath unit (see fig. 2). To remove the main filter unlatch the filter access door located under the unit. Grasp the filter and pull out of unit (see fig. 6a). Filter can be cleaned by tapping or shaking dust from the filter. Filters can be cleaned by rinsing under runningwater. Dry completely before replacing into the unit. To replace the filter simply reverse theprocess. To clean exhaust filter, pull filter out of recess. Wash filter by rinsing with water, dry thoroughly before replacing. (see fig. 6b) CLEANING THE BEATER BRUSH First remove the beater brush from the unit. Press the button on the front of the brush and lift the top off. There maybe some hair, dust, lint, etc. on the turbine wheel and or brush. Remove as much of this as possible. Once cleaned replace the top and snap back in place (see fig. 7). Storage The electrical cord is wrapped around the unit for storage (see fig. 8). Lift the cord retention latch and wrap the cord. Please note, when cord retention latch is not being used to holdthe cord, press it down so it is flush to the unit. Polarized Plug SAFETY INSTRUCTIONS: POLARIZED PLUGS To reduce the risk of electric shock, this equipment has a polarized plug (one blade is widerthan the other). Polarized connections will fit together only one way. If the power cord plugdoes not fit fully into the receptacle, reverse the plug. If it still does not fit fully into the outlet, contact a qualified electrician to install the proper outlet. Do not change the vacuum powercord in any way. Replacement Parts And Maintenance REPLACEMENT FILTER Replacement filters may be purchased from your Black & Decker Service Center or retailer. Use only genuine Black & Decker replacement parts for your vacuum. MAINTENANCE IMPORTANT: UNPLUG VACUUM BEFORE PERFORMING ANY MAINTENANCE. Use only mild soap and a damp cloth to clean your vacuum. ...
Эта инструкция также подходит к моделям:Пылесосы - CCV900 (346.14 kb)