Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Many accidents are caused by poorly maintained tools. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SPECIFIC SAFETY RULES Maintain labels and nameplates on the Vacuum Blower. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear safety impact eye glasses when assembling and using the Vacuum Blower. Using personal safety devices reduce the risk for injury. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location. Do not force the Vacuum Blower. This tool will do the work better and safer at the speed and capacity for which it was designed. Never leave the Vacuum Blower unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. Avoid accidental electrical shock. Do not handle the Power Switch with wet hands. Never plug the Power Cord of this product into an electrical outlet while standing on a wet or damp surface. Plug the Power Cord of this unit only into a 3-hole, 120 volt, Ground Fault Circuit Interrupter (GFCI), electrical outlet for additional protection from electric shock. Do not unplug the Vacuum Blower by pulling on the Power Cord. Do not pull or carry the Vacuum Blower by its Power Cord. Keep the Power Cord away from sharp corners or edges. Industrial applications must follow OSHA guidelines. Always turn off the Vacuum Blower and unplug the unit from its electrical outlet before performing any maintenance or changing accessories. Do not use the Vacuum Blower with any openings blocked. Keep free of dirt, dust, lint, hair, and anything that may reduce air flow or hinder motor operation. Do not use the Vacuum Blower to pick up flammable or combustible liquids such as gasoline. Do not use the Vacuum Blower in areas where flammable or combustible liquids may be present. Do not use the Vacuum Blower to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. Do not use the Vacuum Blower as a sprayer of flammable liquids such as oil base paints, lacquers, household cleaners, etc. Do not allow children to handle or play with this product. Do not use the Vacuum Blower without its Dust Bag and/or Filter in place. Do not use the Vacuum Blower if it has been dropped, damaged, left outdoors, or immersed in liquid. Do not use the Vacuum Blower to pick up water from containers, i.e., sinks, tubs, barrels, etc. Keep the end of the Hose and its accessories away from your face and body. Avoid accidental falls. Use extra care when cleaning on stairways. Do not vacuum toxic, carcinogenic, combustible, or other hazardous materials such as asbestos, arsenic, barium, beryllium, lead, pesticides, or other health endangering materials. Do not expose the Vacuum Blower to rain. Store the unit indoors. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker. WARNING! The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry el...
Эта инструкция также подходит к моделям:Пылесосы - 94282 (960.3 kb)