3 Button Functions ............................................... 4 DVD/SAT Functions .................................... 6 Tivo/Replay Functions .................................. 7 Audio Fuctions ............................................ 8 TV/VCR/DVR ............................................ 8 Setup ............................................................... 9 Battery Installation ....................................... 9 Battery Saver ..............................................

3 Button Functions ............................................... 4 DVD Functions ............................................ 6 Menu In/Out ................................................ 6 Setup ............................................................... 7 Battery Installation ....................................... 7 Battery Saver ............................................... 7 Code Saver ................................................. 7 Power-On default ............................

3. Press the battery cover back into place. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons ar

Normally other types of remotes only punch-through (from another Mode) on the 6 VCR buttons to the device programmed under the VCR Mode button. This is not much use if you are using a DVD programmed under a Mode other than VCR. For example, if you have 2 DVD, VCR or DVR devices programmed into this remote, the last one you accessed on the remote will be the one that has control of the 6 VCR transport buttons when in any other Mode. This feature will not operate if the programmed TV, SAT or Cable

1. Red Indicator Lights when any button is pressed. 2. CODE SEARCH Used for setup. 3. TV, VCR, DVD, CBL, SAT Selects product to be operated. 4. OPEN/CLOSE Opens and closes the DVD player disc tray. 5. MUTE Turns off the TV sound while the picture remains. 6. PREV. CHAN Returns to the previously selected channel, or DVD repeat toggle. REPEAT A-B performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track. 7. CLEAR Clears and/or cancels numeric key entries,

For example - you may want to use your remote to operate the RANDOM PLAY feature from your original CD remote control. This remote is equipped with an “easy learning” feature that allows you to “learn” features (such as RANDOM PLAY from your original CD remote) by following the steps below, and on the next page: 1. Press and hold the CODE SEARCH button until the red indicator turns on, then release the button. 2. Press and release the desired mode button (TV, VCR, etc.), the red indicator blinks

12. PIP TV Picture-in- Picture control. 13. SWAP Swaps TV PIP screens. 14. INSTANT REPLAY - Replays the last 8 seconds of a program. 15. R.ZONES Replay Zones - Searches TV listings by category. L1 & L2 used to store learned commands. 16. BYPASS Manually bypass the ReplayTV encoder. 17. ADVANCE - Catches you up to the live broadcast. 18. INPUT brings up the DVD Player’s Setup Menu. 19. SLEEP Turns off the TV after a period of 1 to 99 minutes. 20. QUIT/CLEAR Used to exit menu functions. 21. OK/SEL

2. Press and hold the MUTE button until the red indicator blinks off, then release the button. 3. Press and release the desired Mode button (TV, VCR, etc.) for Volume/Mute control, the red indicator blinks then stays on. 4. Press and release the MUTE button and the red indicator turns off. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control. 5. All other Modes will now punch-through to your chosen Mode for Volume/Mute control. 6. All “V

Press and hold the CODE SEARCH button until the red indicator stays on. Release the CODE SEARCH button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Press and release the CODE SEARCH button. The red indicator blinks off. 4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn. When the red indicator blinks off the number you pressed is the first digit for the code yo