Войти:
Оценок - 4, средний балл: 4.3 ( )

Инструкция по эксплуатации Jasco, модель RM24930

Производитель: Jasco
Размер: 370.05 kb
Название файла: 24930-Manual-Eng.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


3. Press the battery cover back into place. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons are pressed without batteries in the remote, all codes will be lost. Code Setup The SETUP button is used to setup the remote. You can either setup the remote using the code tables (on separate sheet), or you can search through the library of codes until you find a code that works for your product. Please refer to “ Code Search” on page 8 for more information on using the code search feature to learn how to search through the library of codes for your products. NOTE: You can store any kind of code under any mode (except TV). I.E. you can store a VCR code under the CBL/SAT button, or a Cable code under the DVD/AUX button, etc. However, you can only store TV codes under the TV button. 2 3 Button Functions, cont.Button Functions Button Functions, cont.Button Functions Some buttons on the remote might have functions that SETUP Used to setup ON-OFF Turns are referred to by different names on the device you are the remote, and for product On or Off. controlling. E.G. PREV.CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have PREV.CH ability for the PREV.CH button to operate this feature. TV, CBL/SAT, VCR, DVD/ Red Indicator AUX Selects product to Lights when any 54 Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds. ENTER Used to complete channels selection for some brands of TV. Also used to complete the code entry process. RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. Note the VCR buttons also control DVD when in DVD Mode. be operated. button is pressed. PREV.CH Returns to the previously selected channel. INFO Shows the date and time if your TV or VCR has that feature. Works the same way as a Display button. MENU Brings up device Main Menu. Use Chan and Vol buttons as cursor buttons and Mute as Okay. Press TV to Exit. VOLUME UP/DOWN Changes the volume level of the product, normally the TV. 0-9 Enter numbers for direct channel selection. Some products require ENTER to be pressed after channel selection. CHANNEL Up/Down Changes the channels. The Channel buttons also control DVD SKIP functions. code search function. MUTE Turns off the TV sound while the picture remains. SLEEP enables the remote to turn off your TV after a period of 1 to 99 minutes. INPUT Selects the video inputs of your TV if equipped with that feature. TV/VCR Operates the TV/ VCR function of your VCR. Direct Code EntryMenu Operation Direct Code EntryMenu Operation The Menu button puts the remote in and out of Menu Mode. Pressing Menu brings up your device Menu. While in Menu mode the remote’s red indicator light blinks continuously. The remote will exit Menu Mode after 20 seconds if no keys are pressed. When in Menu Mode, the Menu, Channel, Volume, Mute and Device keys operate as follows: MENU Enters Menu mode. CHANNEL UP/DOWN Cursor Up/Down for Menu navigation. VOLUME UP/DOWN Cursor Right/Left for Menu navigation. MUTE (OK) command for Menu selections. Press TV or any other Device key to Exit, Clear, or Quit the Device Menu and return the remote to normal operation (red indicator will turn off). For certain RCA, GE, and ProScan devices, pushing the MENU button selects the highlighted item. The numeric buttons may also be used to select the MENU choice. Note: Some functions in some brands might not be fully supported. 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press ON/OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write your codes down here for easy reference later. Device Device stored Code TV TV CBL/SAT VCR DVD/AUX 6 7 Using Your Remote Code Search Using Your Remote Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try sear...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории