Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Check the code list and repeat process. 5. Aim the remote at your TV and press the ON•OFF button. Your TV should turn off. CODE.. SEARCH.. INDICATOR.. LIGHT .. TV (BLINK) (OFF) 2 3 5 6 8 9 0 ON•OFF 1 4 7 CHAN + TV CODE.. NOTE: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 6. With your TV on, press CHAN+ (CHANNEL UP). If the TV responds, no further programming is required. 7. Enter your code here for easy reference. 5 Programming For VCR Most GE, RCA and ProScan VCRs will not require programming. Check to see if your VCR responds to the remote before you begin programming. 1. Manually turn on the VCR. Find the three digit code for your VCR in the code list below. CODE.. 2. Press and hold the SEARCH.. CODE SEARCH button until the INDICATOR INDICATOR.. LIGHT .. LIGHT lights, then release the CODE SEARCH button. 3. Press and release the VCR button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your VCR (BLINK) 1 2 3 5 6 8 9 (OFF) 4 7 0 code is entered, the ON•OFF INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT CHAN + will blink. Check the code list and repeat process. 5. Aim the remote at your VCR and press the ON•OFF button. Your VCR should turn off. VCR CODE.. NOTE: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 6. With your VCR on, press CHAN+ (CHANNEL UP). If the VCR responds, no further programming is required. 7. Enter your code here for easy reference. 6 Programming For DVD Most GE, RCA and ProScan DVD systems will not require programming. Check to see if your DVD system responds to the remote before you begin programming. 1. Manually turn on the DVD system. Find the three digit code for your DVD system in the code list below. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the DVD button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. 5. Aim the remote at your DVD system and press the ON•OFF button. Your DVD system should turn off. CODE.. SEARCH.. INDICATOR.. LIGHT .. 1 4 7 DVD (BLINK) (OFF) 2 3 5 6 8 9 0 ON•OFF DVD CODE.. 6. If the DVD System responds, no further programming is required. NOTE: If your DVD does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 7. Enter your code here for easy reference. 7 ProgrammingForDBSSatelliteSystem Most GE, RCA and ProScan Satellite systems will not require programming. Check to see if your DBS Satellite system responds to the remote before you begin programming. 1. Manually turn on the DBS system. Find the three digit code for your DBS system in the code list below. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the DBS button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. 5. Aim the remote at your DBS system and press the ON•OFF button. Your DBS system should turn off. CODE.. SEARCH INDICATOR.. LIGHT SAT (BLINK) (OFF) 2 3 5 6 8 9 0 ON•OFF 1 4 7 CHAN + SATELLITE CODE 6. With your DBS System on, press CHAN+ (CHANNEL UP). If the satellite system responds, no further programming is required. NOTE: If your DBS system does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 7. Enter your code here for easy reference. 8 Programming For Cable 1. Manually turn on the Cable Box. Find the three digit code for your Cable Box in the code list below. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the CBL button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. 5. Aim the remote at your CABLE and press the ON•OFF button. Your CABLE should turn off. CODE.. SEARCH INDICATOR.. LIGHT CABLE (BLINK) (OFF) 2 3 5 6 8 9 0 ON•OFF 1 4 7 CHAN + CABLE BOX CODE 6. With your Cable Box on, press CHAN+ (CHANNEL UP). If the Cable Box responds, no further programming is required. NOTE: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed,...