Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
I.E. you can store a VCR code under the CBL/SAT button, or a Cable code under the DVD button, etc. However, you can only store TV codes under the TV button. 3 Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have PREV.CH ability for the PREV.CH button to operate this feature. Red Indicator Lights when TV, CBL/SAT, DVD, VCR any button is pressed. Selects product to be operated. RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. Note the VCR buttons also control DVD when in DVD Mode. PREV.CH Returns to the previously selected channel. INFO button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remaining/elapsed, system information, etc. Also displays on-screen channel information. MENU Press and release SHIFT/SETUP then MENU/ INFO to display the Menu on the TV. See "Using SHIFT for Menu and Navigation” description on Page 9 for more information. 4 Button Functions, cont. SETUP Used to setup the remote, and for code search function. SHIFT Press and release to access buttons labeled in reverse print (OK, MENU, EXIT). See "Using SHIFT for Menu and ON^OFF Turns Navigation" description on Page 9 product On or Off. MUTE Turns off the TV sound while the picture remains. OK Selects menu items for the device ' you are controlling. VOLUME UP/DOWN Changes the volume level of the product, normally the TV. CHANNEL Up/Down Changes the channels. SLEEP enables the remote to turn off your TV after a period of 1 to 99 minutes. EXIT Exits On-Screen Menus and/or Returns to previous OnScreen selection. NUMBERS Enter numbers for direct channel selection. Some products require ENTER to be pressed after channel selection. ENTER For some TV models, INPUT used after direct For some TVs, press channel number repeatedly to select from entry to immediately available viewing sources change to the (antenna, cable box, VCR, etc.). selected channel. Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds. 5 Direct Code Entry 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. V {2 4 ! (5 7) 18 3 4. With your device on, press ON^OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write your codes down here for easy reference later. Device Device stored Code TV TV CBL/SAT DVD VCR 6 Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 3. Press and quickly release the desired device button (TV, VCR, etc.). The red indicator blinks off once. 4. Press the ON^OFF button repeatedly (up to 300 times) until the device to be controlled turns off. The red indicator blinks off with each button press. 5. Press and release ENTER to install the code. Most users will store VCR codes under the VCR button, Cable codes under CABLE, etc. If (for example) you want to store a VCR code under CABLE, first follow the procedure for Direct Code Entry (previous page) and press CABLE in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search. Note: Code Search starts from the currently stored four digit number under that mode. Sometimes the first code that "works” with your device may only allow limited functionality (e.g. the MENU button might not work). There may be a code that performs more functions. Continue the code search process until the best code is found. 7 Using Your Remote Code Identification The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below: TV 1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button. 2. Press and release ...