Оценок - 4, средний балл: 5
(
)
)
|
Фрагмент инструкции
When the power ts turned on, press the key of the source component to foe operated. Remote se near Model: RC-R0801 Infrared ray system When two operation keys on the remote control unit are pressed successively, press each key securely reserving an interval of more than 1 second for each press. Components connected vis the system control cords, such as the CD player, can also be remote-controlled. In this case, pie?-the instruction manual supplied with your CD player. > When the batteries are exhausted and replacement becori., >4-essary, replace them with alkaline batteries (LR6). 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries, 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor, In such a case, change the system installation position to prevent the malfunction. Keys and controls This unit can remote control KENWOOD CD player and cassette deck which are connected through system control cords. In addition, it can also control video components from other manufacturers than KENWOOD by recalling the manufacturer codes preset with it. For tlje method of recalling maker codes and the operating procedure, refer to page 6. Display Displays the component being controlled. POWER key Press to turn the power of the controlled component ON and OFF. Numeric keys | Use as the numeric keys of the con- |w trolled component, 1 ENTER key Press when entering manufacturer codes. Operation keys The contents of operations vary de-' pending on the con trolled components. SURROUND key Press to select the surround mode of the receiver unit, CQWEft ¡ AUfflO VC« CD TV/CA8LE! □!OOOOi 10©0©@ © О 10 I CNTGfl a......□........t>] QD Ш Controlled component select keys Press to select the component controlled by the remote control unit. AUDIO key Press when remote controlling audio components from KENWOOD. (-»-AUDIO —►-CD-1 L-TAP B—TAP a*-J VCR key Press when remote controlling video decks, VCR 1 -«—► VCR 2 LD key Press when remote controlling an LD player. TV/CABLE key Press when remote controlling a TV or cable TV. TV-—»-CABLE DISPLAY key | Press to display the components which can be remote controlled currently for 5 seconds. MUTE key Press to mute sound temporarily. VOLUME keys Press to adiust the volume. When these keys зге operated, the VOLUME CONTROL knob on the receiver unit rotates and the indicator on the knob blinks at a high speed. INPUT keys Press to select the inputs. Model: RC-R0801 Infrared ray system Operating the KA-995 This unit can remote control KENWOOD CD player and cassette deck which are connected through system control cords. In addition, it can also control video components from other manufacturers than KENWOOD by recalling the manufacturer codes preset with it. For the method of recalling maker codes and the operating procedure, refer to page 6. Operating the KA-995 0) Press the AUDIO key to display "AUDIO". Press the POWER key to turn the power of the main unit (KA-995} ON. © Press operation keys. * The keys covered with ;g|g are not used in the operation of the receiver. POWER key Surround-related keys For the adjustment procedure, please reler to pages 9 to 12 with the KA-995, f£D O ;©'©<3)'©©i !®.£).S)..Q..0j StMROUNO ■ :f4 ] f\/\ iVi M KENWOOD fl EMOTE CONTROL UN!T RC-R0801 Select AUDIO. Each press switches the sources as follows, (1) AUDIO (|) CD @TAP A (Tape A) (l)TAP B (Tape B) Numeric keys Function as the numeric keys of the tuner when the TUNER input is selected, MUTE key Press to mute the sound tempo- § rarily, VOLUME keys Press to adjust the volume. When these keys are operated, the VOLUME CONTROL knob on the receiver unit rotates and the indicator on the knob blinks at a high speed. INPUT keys Press to select the inputs. Model: RC-R0801 infrared ray system Operating the CD player or cassette deck This unit can remote control KENWOOD CD player and cassette deck which are connected through system control cords. To control KENWOOD CD player or cassette deck: 0) Press the AUDIO key to select "CD" "TAP A" or “TAP 8". ©Press the operation keys. Select other source than AUDIO. Each press switches the source as follows: ©AUDIO CD d)TAP A (Tape A) (£)TAP B (Tape B) (Select "TAP B" when your cassette deck is a single-deck unit.) Use as the search keys of the CO | player. I Preset operation Q Find the set-up code of the component to be registered. Refer to the set-up code list on pages 10 and after to finbv-set-up code of the component to be registered. Example: To register a VCR from KENWOOD, 056, 061 or 082 E3 Set the display for the component to be registered. Each press of each key switches the display as follows: Displayed characters VCR ...