Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Using the remote control English EN 9 Example of DVD. 1 Set up the remote control for a device (in this example DVD) as described in chapter 3.2.1 ‘Code search by brand’. 2 Select DVD by pressing the DVD mode button for more than 1 second. • The remote control sends out the ‘Select DVD’ command. 3 Press and immediately release the SETUP button.Then press and immediately release the DVD mode button to select DVR. • The remote control sends out the ‘Select DVR’ command. Notes • This method can be applied similarly to all Combo devices (TV / DVR,TV / VCR, DVD / DVR, etc.) and is available for all device modes. • Note that this feature is not supported by all codes. Keep updated for future devices 5.1 Learning commands The learning feature allows you to ‘learn’ the remote control functions from your original remote control. For example: you may want to use your remote control to operate the RANDOM PLAY feature from your original CD remote control. ± 1 inch INPUT MUTE ON/OFF LEARN VCR SETUP POWER LIVETVMOD DSP TV DVR DVD CBL SAT HD AUDIO AUXDSP SELECTOK 1 Press and hold the SETUP button until the red light indicator turns on, then release the button. 2 Press and release the desired mode button (TV, DVR, etc.). • The red light indicator flashes, then remains lit. 3 Press and release the LEARN button. • The red light indicator flashes, then remains lit. 4 Press and release the button on the SRU5108 that you wish to learn a new function (e.g. POWER). 5 Point both remote controls facing each other by approximately 1 inch apart (refer to chapter 5.4 ‘Tips on learning’). 6 Press and hold the button from which you wish to learn on the original remote control (e.g. POWER) until the red light indicator flashes once and then remains lit. • If there is a learning problem, the red light indicator flashes for three seconds and then remains lit. If this happens, repeat steps 4 to 6. 7 Repeat steps 4 to 6 for other buttons you wish to learn a new function. 8 Press and release the SETUP button when all desired remote control commands have been learned. • Code Learning is now complete. 10 EN 5.2 Clearing commands 5.2.1 Clearing all learned commands under a mode Clearing learned commands can be useful if, for example, you replace your CD player with another brand or model. If you had learned a feature from your old CD player’s original remote control on to this remote control (such as RANDOM PLAY), that feature would no longer work for your new CD player. 1 Press and hold the SETUP button until the red light indicator turns on, then release the button. 2 Press and release the Mode button for the mode you wish to clear learned functions from (TV, DVR, etc.). • The red light indicator flashes off. 3 Press and release the LEARN button twice. • The red light indicator flashes off. 4 Press and release the SETUP button. • The red light indicator turns off. All learned commands under that mode are now cleared. 5.2.2 Master clear - Clearing all learned commands under all modes 1 Press and hold the SETUP button until the red light indicator turns on, then release the button. 2 Press and release the LEARN button twice. • The red light indicator flashes off. 3 Press and release the SETUP button. • The red light indicator turns off. All learned commands, stored in the remote control memory have now been cleared. 5.3 Tips on learning You can only learn one device type under a Mode button. For example, you can only learn TV codes under the TV mode button, DVR codes under the DVR mode button, etc. If you are trying to learn from a ‘universal’ remote control, it might have more than one code type stored under a Mode button. Try learning from another remote control to see if there’s a problem with the type or brand of remote control you are trying to learn from. • Some functions from some types of remote controls might not be learned. • No functions may be stored under the LEARN, SETUP or BACKLIGHT ( ) buttons. • Only one original device type can be learned per individual mode. • Use fresh batteries for both the SRU5108 and the original remote control. • Keep at least three feet away from incandescent or low- energy lights when learning. • Place both remote controls on a flat surface (like a coffee table) and aim them in such way that the IR transmitter of the original remote control points at the IR transmitter of the SRU5108. • Keep about 1 inch in between the remote controls. You may need to adjust the height of one of the remote controls to achieve this. Keep updated future devices English EN 11 • Do not move or change the distance between the two remote controls until you have learned all the required buttons for the selected mode. • When learning, do not release the button being learned until the red light indicator has flashed off for half a second. • Avoid learning your original remote control Volume / Mute buttons unless you are sure these operate the same device e.g. some original DVD remote controls include TV Volume / Mute button cont...