Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
fast forward. 9..................................... stop. 0.................................... record. ;...................................... pause. 4P 3P......................... previous (4P) / next (3P) page / track in various modes. / ........................ set your Thumb ratings. 7 ................................. used after direct channel selection. some devices require ENTER to be pressed after channel selection. ........................... selects between one and two-figure channel numbers. 8 ............. digit buttons for direct channel / track selection. 9 ................................. switches the selected device on / off. Note For some TV brands / types, the button will only turn off the TV. You will have to press a digit button (direct channel selection) to turn on the TV again. 3.2 Resetting a button to its original function If an improved button (see chapter 2.2.2) still does not function as expected, you can always reset the button to its original function. 1 In the current device mode, keep digit buttons and pressed simultaneously for 5 seconds, until the red Setup light lights up. • The remote control is now in setup mode. 2 Press digit buttons , , and , in that order. • After each button press the red Setup light blinks once. 3 Press the button that you wish to reset twice. E.g. the 22 button. • After each button press the red Setup light blinks once. • The red Setup light will blink one more time to confirm that the button was succesfully reset to its original function. Using the universal remote control 2 x 5 sec. Service and support 4.1 Frequently asked questions In this chapter you will find answers to the most frequently asked questions about your universal remote controls. 4.1.1 Setup I cannot enter setup mode. Batter y level too low or batter y lifetime came to an end. • Replace the batteries. See chapter 2.1. After replacing the batteries, test if the remote control still operates your devices. If it does not, you have to set up the remote control again. For this refer to chapter 2.2. The brand code for my device is missing in the ‘Shortlist of brands’ in the Quick Start Guide. The ‘Shor tlist of brands’ only mentions the most common TV, DVD, CBL/SAT, DVR and VCR brands. • You will find a complete brand list on page 18-30 of this user manual. • Use ‘9999’ as 4-digit code in case you cannot find your brand in the complete brand list. Note that using ‘9999’ may result in a long setup (up to 15 minutes). My TV switches OFF in step 4 but does not switch ON again in step 5. TVs of some brands (e.g. Panasonic) only switch ON after a long press on one of the digit buttons. After a long button press in setup mode the remote control will star t tr ying to improve the button (see chapter 2.2.2) instead of switching ON the TV. • In this case, switch ON the TV manually or use the original remote control for this. Continue with step 6. After successfully completing setup, the remote control will switch ON the TV with a long button press on one of the digit buttons, just as your original remote control. After setup, not all buttons work as expected. • Tr y improving the button(s). See chapter 2.2.2. How do I set up the remote control for combo devices (TV / VCR,TV / DVD, DVD / VCR, etc)? Some combo devices require you to set up two different device selection buttons to control both par ts of the combo device. For example, if you have a TV / DVD combo, you might need to set up the remote control for both TV and DVD to operate your TV / DVD combo. 4.1.2 Operation The remote control does not wake up anymore. Batter y level too low or batter y lifetime came to an end. • Replace the batteries. See chapter 2.1. After replacing the batteries, test if the remote control still operates your devices. If it does not, you have to set up the remote control again. For this refer to chapter 2.2. The device I want to operate does not respond at all / does not respond to all of the button commands. • Check if the buttons you press are available on the original remote control of the device. • Tr y improving buttons. See chapter 2.2.2. Wrong code selected during setup. • Set up the remote control again for the device. Always test if the device responds, before leaving setup mode. It may be that the buttons that you are tr ying to use have a different naming on the original remote control. • Tr y out all buttons to find the one(s) you need. Service and English 12 EN EN 13 4.1.3 Batteries Will my settings be deleted when I replace the batteries? No. All user settings will be retained in the remote control memor y for 5 minutes. Warning The batteries should not be exposed to excessive heat such as sunshine, fire or the like. 4.2 Need help? We advise you to first read this user manual carefully. It is provided to help you set up and use the remote control. If, however, you require extra information or have additional questions about setup, usage, spare par ts, warranty, etc. of the universal remote control...