Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
A Learning indication appears in the upper right corner of the touch screen. 6Press and hold the key on the other remote control for 1 second. Make sure you press the key within 5 seconds. If learning succeeded, you will get an OK message. If learning failed, you will get a Failure message. See ‘ProntoPro NG will not learn commands’ on page 58 for more information. 7 When you want ProntoPro NG to learn other device actions, repeat steps 5 and 6. 8Press the left firm key labeled below the touch screen to stop learning. Labeling Elements The Label Tool allows you to label a button, a device or a page. In the Label Tool you can find a virtual keyboard. This keyboard zooms in when you tap a character. The keyboard contains five different character sets, including a series of symbols you can use for labeling. You use the Shift button to switch between the five character sets on the keyboard. For a complete list of the symbols, see ‘List of Symbols’ on page 61. User Guide 25 Customizing ProntoPro NG Labeling a Button 1Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears. 2Tap in the Tools Menu. The ‘Label Tool’ screen appears. The page you last visited appears. 4 Navigate to the Device and the Page that contains the button you want to label. 5Tap the button you want to label. The ‘Labeling’ screen appears. 6Tap the keyboard. The keyboard zooms in. 7Tap the character you want to add to the label. The character is added to the label. The keyboard automatically zooms out again. 1To zoom out without adding a character to the label, press The character is not added to the label. The keyboard is zoomed out. 2To use other characters and symbols, press The character set on the keyboard switches. You can choose from four different character sets. 3To remove characters, press the firm key labeled . The character in front of the cursor is removed. 8You can add other characters to the label. 9Tap . The label of the selected button is changed. The last visited page appears again. -or- Tap . The last visited page appears again, without changing the label of the selected button. 10 You can select other buttons on ProntoPro NG to label. 11 Press the left firm key labeled below the touch screen to exit the Label Tool. 3Tap . . . User Guide 26 Customizing ProntoPro NG Labeling a Device 1Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears. 2Tap in the Tools Menu. The ‘Label Tool’ screen appears. The Device Overview appears. 4Tap the Device you want to label. The ‘Labeling’ screen appears. 5 Follow the instructions 6 to 8 of ‘Labeling a Button’ on page 26. 6Tap . The label of the selected Device is changed. The Device Overview appears again. -or- Tap . The Device Overview appears again, without changing the label of the selected device. 7You can select other Devices in the Device Overview to label. 8Press the left firm key labeled below the touch screen to exit the Label Tool. Labeling a Page 1Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears. 2Tap in the Tools Menu. The ‘Label Tool’ screen appears. in the ‘Label Tool’ screen. The Page Overview appears. 4Tap the Page you want to label. The ‘Labeling’ screen appears. 5 Follow the instructions 6 to 8 of ‘Labeling a Button’ on page 26. 3Tap . 3Tap User Guide 27 Customizing ProntoPro NG . 6Tap The label of the selected Page is changed. The Page Overview appears again. -or- Tap . The Page Overview appears again, without changing the label of the selected page. 7You can select another Page in the Page Overview to label. 8Press the left firm key labeled below the touch screen to exit the Label Tool. Adding Devices The Add Tool allows you to add a new device or copy an existing device. When you add a new device, a device template stored on your ProntoPro NG is used to create the device pages, buttons and functions. By default Philips IR codes are used when you add a new device. For your brand of device, you then have to program the new device using the Brand Tool (page 20) or the Learn Tool (page 23). Copying an existing device saves time. The personal settings you defined for that device will also be copied. For instance, if you want to add a second CD player, you do not have to define the Brand, learn or create macros again. You can just copy them from the existing CD player already programmed on your ProntoPro NG. Adding a New Device 1Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears. 2Tap in the Tools Menu. The ‘Add Tool’ screen appears. in the ‘Add Tool’ screen. 4Tap the device template you want to add in the Device Templates list. The ‘IR Code’ screen appears. 5Tap . The ‘Actions’ screen appears. 3Tap The ‘Adding’ screen appears. User Guide 28 Customizing ProntoPro NG 6Tap in the ’Actions’ screen. The Device is added to Pr...
Эта инструкция также подходит к моделям:Телевизоры - TSU7000/37 (826.29 kb)