Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
.............................................................12 AREA ..................................................................13 PROfILE.......................................................13, 14 SETTINGS ..........................................................14 CONTRAST....................................................14 BUZZER .........................................................14 SECURITY......................................................15 BATTERY LEVEL...........................................15 SYSTEM SETUP (Advanced Settings)............15 NETwORK ...............................................16–19 ASSOCIATION...............................................19 HAI SETUP ....................................................19 RTS DEVICES ...............................................19 UTILITIES.......................................................20 INTRODUCTION Leviton’s Programmer/Remote, Cat. No. RZCPG, is a multi-functional device. It uses Z-WaveTM technology to act as a programmer, zone or scene controller, remote for setting up and operating your ViziaTM RF network. This manual will guide you through the understanding of your RZCPG functions as a setup controller. Once your network is installed, your RZCPG may also be used as a wireless controller for controlling your lighting system. Your RZCPG comes with batteries. 1 ON 2 ON 3 ON 4 ON + – • • • OFF OFF OFF OFF RZCPG Programmer/Remote MENU NAVIGATION and ICONS Navigating screens and menus on your RZCPG is accomplished using the following buttons: From the HOME Screen, pressing buttons 1, 2, 3, 4 will control the areas displayed. The right soft key brings you to the MAIN MENU screen from the HOME screen and is used for saving and completing tasks. The left soft key is used to bring you back to the previous screen. The up and down arrow buttons allow you to scroll through each screen and will move the selection box ( 1. Device List ) to each choice. NOTE: Selections are made on each screen by pressing the center button on the RZCPG unless prompted otherwise. x1 Back MAIN MENU 1. Device List 2. Who Is... 3. Area 5. Settings 4. Profile Home 1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 Stand By -RZCPG- Default Profile 1. Area #1 2. Area #2 3. Area #3 4. Area #4 Menu LCD Display (HOME screen depicted) Right Soft KeyArrow Buttons (up, down, left, right) Center Button "+" Button "–" Button Left Soft Key 2CENTER BUTTON 1 ON OFF x1 12:00 PM Mon 05.01.2006 Default Profil e Stand By Menu 1 ON 2 ON OFF OFF x1 12:00 PM Mon 05.01.2006 Default Profil e Stand By Menu The filter is used when you wish to view only checked devices, or only unchecked devices from a list. Use the right arrow button to toggle between showing devices checked, unchecked or all (no filter). x1 Back (3) Area #1 Who Is Bedroom Bathroom Hall selected 3 1 ON 2 ON 3 ON 4 ON OFFOFFOFFOFF Default e Stand By Menu x1 Back Home AREA << NEW >> <