Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Handset Line Cord (Coiled, 10 ft.) C. Base Unit D. Phone Line Cord (long/short flat) Carefully remove all of the contents from the package. If there is any visible damage, or any of the contents are missing, do not attempt to operate this equipment. Please call 1-800-552-3368 to exchange this unit for a factory-fresh replacement. In addition to the items listed above, you will need one of the following to complete installation of this unit: • Modular Wall Jack, or • RJ-11C Modular Jack Adapter (if you have an older 4-prong jack) INSTALLATION Warning: To prevent electrical shock, always remove the telephone line cord from the wall jack before removing the cord from the telephone. Never leave the line cord connected to the wall jack if it is not also connected to the telephone. Select a Location: • This unit requires a modular phone jack. • The unit should be located in an area where it is easy to see the lighted ringer. • The unit can be used as a desk top phone or a wall mount phone. Avoid placing the unit where it will be exposed to excessive heat or humidity. Connecting the Clarity C200 Phone: To install as a Desk Unit: • Plug one end of the telephone line cord (flat) into the back of the Clarity telephone. • Plug the other end of the telephone line cord into the wall jack. • Plug one end of the handset cord (coiled) into the bottom of the handset. • Plug the other end of the handset cord into the jack located on the back of the Clarity telephone. • Place the handset in the cradle of the Clarity telephone. Note: If you are plugging the phone into an older 4-prong jack, use an RJ11C adapter B D JK L 1 2 3 4 5 6 7 8 9 0 * # ABC GHI MNO WXYZ PQRS TUV OPER MUTE RESET REDIAL FLASH DEF A C Desk Mount Key Wall Mount Key Wall Plate Back of Phone Tabs Hook Switch To Install As a Wall Unit: Important: A modular wall jack with raised mounting pins is required for installation as a Wall Unit. • Plug one end of the telephone line cord (flat) into the back of the Clarity telephone. • Attach the bottom of the Clarity telephone to the modular wall jack using the raised pins. It snaps into place. • Plug the other end of the telephone line cord into the wall jack with raised mounting pins Warning: To prevent electrical shock, always unplug the telephone line cord from the wall before removing the cord from the telephone. Never leave the cord connected to the wall if it is not also connected to the telephone. • Hold the Clarity telephone so that the holes on the wall plate line up with the raised mounting pins on the modular wall jack. Once the holes are lined up, push the phone in towards the wall jack and then slide the phone downward until it is securely seated on the wall jack. • Plug one end of the handset cord (coiled) into the bottom of the handset. • Plug the other end of the handset cord into the jack located on the back of the Clarity telephone. • Place the handset in the cradle of the Clarity telephone. The special tabs will hold it in place. RJ-11C Flat cord here Back of Phone JK L 1 2 3 4 5 6 7 8 9 0 * # ABC GHI MNO WXYZ PQRS TUV OPER MUTE RESET REDIAL FLASH DEF Coiled cord here CLARITY C200 FEATURES 1. Boost Button 2. Visual Ringer 3. Volume Control 4. Ringer ON/OFF 5. Tone/Pulse Selector 6. Reset Button 7. Flash Button 8. Mute Button 9. Braille Button #5 Key 10. Backlit Dialpad 11. Redial Button Your Clarity C200 is packed with features that will help you improve your communications over the telephone. Clarity Power Control The Clarity Power Control allows you to control the clarity of your phone conversations. It will let you hear clearly phone calls that are normally difficult to understand. The amplification will be increased by up to 26 decibels and the frequency band from 2000 to 3000Hz will be specially enhanced to improve the clarity of your call. Boost Control The C200 has a boost button that controls the loudness of the receiver. Once the boost button is pressed, the Clarity Power Control is activated. The visual ringer will illuminate when the Boost Button is activated. To Increase/Decrease Clarity Power: Adjust the volume control wheel up or down. WARNING: When Boost button is lit volume may be at a high level. To protect hearing, lower volume control to minimum. Visual Ringer A lighted ringer sends out a visual flashing alert every time a phone call is coming in. (This ringer will light up regardless of the setting on the ringer control.) Backlit Dial Pad The dial pad features translucent backlit buttons that will make calling easier. C200™ Corded Telephone User Guide Featuring Clarity® PowerTM Technology Tone/Pulse Selection The Clarity C200 can be used as either a TONE (touch dial) or PULSE (rotary dial) phone. Tone dialing is required for using special phone services such as long distance calling. Please check with your local phone company on certain types of service. Note for Users with Pulse/Rotary service only: Many automated answering systems used by banks, stores and government agencies as...