Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
To scroll CID records: 1. Make sure the phone is OFF (not in TALK mode). 2. Press the caller ID-volume ( ▼ ) button to review the newest CID record. 3. Press the caller ID-volume ( 5 ) button to review the oldest CID record first. 59 Dialing a CID Number 1. Make sure the phone is OFF (not in TALK mode). 2. Use the caller ID-volume ( ▼ or 5) button to display the desired record. 3. Press the TALK/CALL BACK or SPEAKER button. The number dials automatically. NOTE: Depending on (a) how the incoming caller's phone number is formatted when it is received, and (b) whether or not you previously pre-programmed your local area code into the set up menu, you may need to adjust the format of the incoming caller's stored phone number before making the call, press the conf/format button to adjust the number, and try again. Available formats include: Number of digits Explanation Example_ Eleven digits long distance code "1 " 1-317-888-8888 +3-digit area code +7-digit telephone number. Ten digits 3-digit area code + 317-888-8888 7-digit telephone number. Seven digits 7-digit telephone number._888-8888 60 Storing CID Records in Internal Memory You may also store CID information in the phone's internal memory. NOTE: It is important that you format CID records correctly BEFORE storing in internal memory as you cannot reformat CID records stored in memory. 1. Make sure the phone is OFF (not in TALK mode). 2. Use the caller ID-volume ( ▼ or 5) button to scroll to the desired CID record. 3. Press the memory button to display SELECT MEMORY 01-50. 4. Use the touch-tone pad to enter a memory location to store the number in that memory location. You will hear a confirmation tone. NOTE: If the memory location is occupied, REPLACE MEMO? is displayed, and you must confirm replacement by pressing the memory button. NOTE: Press the *tone/exit button once to keep the previous setting (making no changes) and return to the menu. 61 NOTE: If the selected CID record contains any information that is non-numeric, the unit will not allow this record to transfer to the internal user memory. The handset will display UNABLE TO STORE. To Replace a Stored CID Record 1. Repeat steps 1 through 3 in Storing CID Records in Internal Memory. After you enter the memory location, REPLACE MEMO? shows in the display. 2. Press the memory button again, and the new CID record replaces the old memory in that location. You will hear a confirmation tone. Deleting a CID Record 1. Make sure the phone is OFF (not in TALK mode). 2. Use the caller ID-volume ( ▼ or 5) button to display the CID record you want to delete. 3. Press the delete button. The display shows DELETE CALL ID? 4. Press the delete button to erase the record showing in the display. The display shows DELETED. NOTE: Press the *tone/exit button to return to the standby mode without deleting any CID records. 62 Deleting All CID Records 1. Make sure the phone is OFF (not in TALK mode). 2. Use the caller ID-volume ( ▼ or 5) button to display any Caller ID record. 3. Press and hold the delete button until DELETE ALL? shows in the display. 4. Press delete button to erase all of the current CID records. The display shows DELETED followed by NO CALLS. NOTE: Press the *tone/exit button to return to the standby mode without deleting any CID records. Memory_ Each handset can store up to fifty 20-digit numbers with up to 15-character names in memory for quick dialing. This memory feature is in addition to the CID memory log, which stores up to 40 CID records in each handset. Storing a Name and Number in Memory 1. Make sure the phone is OFF (not in TALK mode). 2. Press the memory button to display SELECT MEMORY 01-50. 3. Press the desired memory location button (01 through 50) or use the caller ID-volume ( ▼ or 5) button to scroll to desired the memory location. 63 NOTE: If the memory location is occupied, the memory location number and stored name and telephone number shows in the display. If the memory location is empty, EMPTY shows in the display. 4. Press the memory button. The display shows ENTER NAME. 5. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H. NOTE: If you make a mistake press the delete button to backspace and erase the wrong character(s) or number(s). 6. Press the memory button to confirm and save the record. The display shows ENTER TEL NUMBR. 7. Use the touch-tone pad to enter the telephone number (up to 20 d...