Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
ERASING A STORED NUMBER 1. Press the STORE button. 2. Press the memory location (A, B, C, 1 - 9) to be erased. 3. Press the DELETE button. COPYING CALLER ID MEMORIES TO USER MEMORY 1. Press the REVIEW ^ or V buttons to view the caller number and name you want to copy. 2. Press the STORE button. 3. Press 1-9, A, B, or C for the memory location. The memory location flashes in the display if there is a record occupying that memory location. NOTE: You may select a different memory location by pressing REVIEW ^ or V buttons to scroll through the memories or press A, B, or C or 1 - 9. 4. Press the STORE button to enter the edit mode, and then press the STORE button again to edit the name. 5. Press the STORE button to confirm and save, and wait for three seconds to exit. NOTE: If the name you want to enter is longer than 12 characters, only the first 12 characters will be copied into memory. COPYING REDIAL NUMBERS TO MEMORY 1. Press the REDIAL/PAUSE button while the phone is on-hook. The display shows "PICKUP PHONE." 2. Press the STORE button. 3. Press 1-9, A, B, or C for the memory location. Press the STORE button twice to confirm the location and the number. The cursor flashes in the display and you may enter the caller's name. 4. Press the STORE button twice to confirm and save, and wait for three seconds to exit. NOTE: If you want to edit the number, press the STORE button within three seconds to enter the edit mode. DIALING A NUMBER STORED IN MEMORY WHILE ON-HOOK 1. Press a line button. 2. To select a memory, press A, B, or C, or DIAL and 1 - 9. The number in that memory location displays. NOTE: You may select a different memory location by pressing REVIEW ^ or V buttons to scroll through the memories or press A, B, or C, or DIAL and 1 - 9. 3. Press the SPEAKER button, or pick up the handset to dial the displayed number. DIALING A NUMBER STORED IN MEMORY 1. Press a line button, and lift the handset, or press the SPEAKER button. 2.Press A, B, or C, or DIAL and 1 - 9. IMPORTANT: If you make test calls to emergency numbers, remain on the line and explain the reason for the call. Also, make test calls in off-peak hours, such as early morning or late evening. CHAIN DIALING Chain dialing allows you to dial a sequence of stored numbers from separate memory locations. For example Memory location Local access number A Long distance company B Authorization code ID Long distance phone number Memory 1 1. Select the line you want to use by pressing the corresponding line button. 2. Lift the handset, or press SPEAKER for speakerphone 3. Press memory button A. 4. Press memory button B. 5. Press the DIAL button and the 1 key. STORING A PAUSE IN MEMORY The REDIAL/PAUSE button has dual functionality and becomes a pause button when the STORE button is pressed first. It is valid only when storing a number into memory locations. Use the REDIAL/PAUSE button to insert a pause when a delay is needed in an automatic dialing sequence. For example, when you must dial a 9 to get an outside line or when you enter codes to access your long distance company. You may need to adjust the length of the pause duration. It can be adjusted from 1 to 9 seconds in length. The default setting is 4 seconds. 1. Press the STORE button. 2. Press the REDIAL/PAUSE button. The current pause time displays. 3. Press the REVIEW ^ or V buttons to scroll the pause time, or press the 1 to 9 key for one second to nine seconds respectively (i.e.; 1 = one second, 2 = two seconds). 4. Press the STORE button to save. PRE-DIAL Use the pre-dial feature to enter a telephone number and automatically dial out without lifting the handset or pressing the SPEAKER button. 1. Enter the telephone number. 2. Lift the handset or press the SPEAKER button. NOTE: Press FLASH/EXIT button to delete the pre-dial number. TROUBLESHOOTING TIPS NO DIAL TONE • You must press a line button to get a dial tone. • Check all cabling to make sure that all connections are secure and not damaged. • Check hook switch: Does it fully extend when handset is lifted from cradle? NO DISPLAY • Replace batteries. • Check for proper battery installation. NO INFORMATION IS SHOWN AFTER THE PHONE RINGS • Did you order Caller ID service from your local telephone company? This unit requires that you subscribe to Caller ID service in order to work. • Be sure to wait until the second ring before answering. PHONE DIALS IN PULSE WITH TONE SERVICE • Make sure TONE/PULSE DIAL MODE in the setup menu is set to TONE DIAL. PHONE WON'T DIAL OUT WITH PULSE SERVICE • Make sure TONE/PULSE DIAL MODE in the setup menu is set to PULSE DIAL. PHONE DOES NOT RING • Is the ringer switch in the OFF position? • Are you using too many phones on one line? (The total REN of all phones on the same line should not be greater than the maximum REN for your calling area. See paragraph 1 of the Equipment Approval Information section of this User's Guide for more information). • See No Dial Tone. INCOMING AND OUTGOING VOICE VOLUME LOW • Are othe...