Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Telex reserves all patent, proprietary design, manufacturing, reproduction, use and sales rights thereto, and to any article disclosed therein, except to the extent rights are expressly granted to others. Copyright Notice Copyright 2008 by Telex Communications, Inc. All rights reserved. Reproduction, in whole or in part, without prior written permission from Telex is prohibited. Warranty Notice See the enclosed warranty card for further details. Customer Support Technical questions should be directed to: Customer Service Department RTS/Telex Communications, Inc. 12000 Portland Avenue South Burnsville, MN 55337 USA Telephone: 800-392-3497 Fax: 800-323-0498 All shipments of product should be made via UPS Ground, prepaid (you may request from Factory Service a different shipment method). Any shipment upgrades will be paid by the customer. The equipment should be shipped in the original packing carton. If the original carton is not available, use any suitable container that is rigid and of adequate size. If a substitute container is used, the equipment should be wrapped in paper and surrounded with at least four (4) inches of excelsior or similar shock-absorbing material. All shipments must be sent to the following address and must include the Proof of Purchase for warranty repair. Upon completion of any repair the equipment will be returned via United Parcel Service or specified shipper, collect. Factory Service Department Telex Communications, Inc. 8601 East Cornhusker Hwy. Lincoln, NE 68507 U.S.A. Attn: Service This package should include the following: Return Shipping Instructions Customer Service Department Telex Communications, Inc. (Lincoln, NE) Telephone: 402-467-5321 Fax: 402-467-3279 Factory Service: 800-553-5992 Please include a note in the box which supplies the company name, address, phone number, a person to contact regarding the repair, the type and quantity of equipment, a description of the problem and the serial number(s). CHAPTER 1 XCP-40-DB9 9000-7515-000 FIGURE 1. XCP-40-DB9 The XCP-40-DB9 breakout panel allows for the expansion of the ADAM frame at 40+, 80+, and 120+. When using the 40-port DB-9 breakout panel, you must use the SCSI backcard with the AIO-16 card. 9-pin Male D-sub Pin 1 Keypanel Data + Pin 2 Keypanel Data - Pin 3 Gnd Pin 4 Audio Out + Pin 5 Audio Out - Pin 6 Gnd Pin 7 Audio In - Pin 8 Audio In + Pin 9 Gnd SCSI Connector - J1, J2, J3, J4, J5 Pin Number Port Function 2 Data + 27 Data - 34 1 Audio To Matrix + 9 1 Audio To Matrix - 35 1 Audio From Matrix + 10 1 Audio From Matrix - 36 2 Audio To Matrix + 11 2 Audio To Matrix - 37 2 Audio From Matrix + 12 2 Audio From Matrix - 3 SCSI Connector - J1, J2, J3, J4, J5 Pin Number Port Function 38 3 Audio To Matrix + 13 3 Audio To Matrix - 39 3 Audio From Matrix + 14 3 Audio From Matrix - 40 4 Audio To Matrix + 15 4 Audio To Matrix - 41 4 Audio From Matrix + 16 4 Audio From Matrix - 42 5 Audio To Matrix + 17 5 Audio To Matrix - 43 5 Audio From Matrix + 18 5 Audio From Matrix - 44 6 Audio To Matrix + 19 6 Audio To Matrix - 45 6 Audio From Matrix + 20 6 Audio From Matrix - 46 7 Audio To Matrix + 21 7 Audio To Matrix - 47 7 Audio From Matrix + 22 7 Audio From Matrix - 48 8 Audio To Matrix + 23 8 Audio To Matrix - 49 8 Audio From Matrix + 24 8 Audio From Matrix - 4 Notes 5...