Оценок - 0, средний балл: 5
(
)
)
|
Фрагмент инструкции
NOTE: Your ClearSounds® CSC500 comes from the factory preset in the OFF position. If you would like to override the factory preset, simply change the selection on the back of the phone to ON. - Ringer Setting You can adjust the ringer of your phone as high as 85 dB. The ringer volume level can be adjusted by sliding the switch on the back side of the phone. Ringer options include HI, LO and OFF. Please Note: Your phone is also equipped with a visual flasher that automatically flashes when the phone rings. 10 – ENGLISH - Using your Phone with Hearing Aids and Cochlear Implants Your phone can be used with hearing aids and cochlear implants equipped with a telecoil (T-coil). Adjust your hearing aid “Tswitch” to the “T” position. Make sure to hold the handset close to your T-coil. - Using your Speakerphone For optimal speakerphone performance, avoid the following: • Areas with high background noise (The microphone might pick up these sounds and prevent the speakerphone from going into the receiving mode when you finish talking). • Surfaces affected by vibration. • Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which can generate an echo effect. - Answering a Call NOTE: Make sure the ringer switch is set to HI or LO to hear the audible ring. If you have selected OFF, the visual flasher will be your only ring notification. Using the Handset 1. To answer a call, lift the handset and speak. You will see the In Use LED indicator light up. 2. Adjust your volume and tone settings if needed. 3. To end the call, replace the handset on the base. Using the Speakerphone 1. To answer a call, press the Speaker key on the base. You will see the In Use LED indicator light up. 2. Adjust your volume by using the volume control V- or V+ located on right side of the phone. 3. To end the call, press the Speaker key again on the base. 11 – ENGLISH - Making a Call Using the Handset 1. To make a call, lift the handset and listen for a dial tone. You will see the In Use LED indicator light up. 2. You can dial a number manually or press one of the memory dial keys once programmed. 3. Adjust your volume and tone settings if needed. 4. When finished, hang up the handset. Using the Speakerphone 1. Press the Speaker key on the base and listen for a dial tone. You will see the In Use LED indicator light up. 2. You can dial a number manually or press one of the memory dial keys once programmed. 3. Adjust your volume by using the volume control V-or V+ located on right side of the phone. 4. When finished, press the Speaker key to hang up. 5. To change back from speakerphone to handset use, simply pick up the handset to disable the speakerphone. 6. To change back from handset to speakerphone, simply press the Speaker key and then hang up the handset. 12 – ENGLISH TELEPHONE SETTINGS TELEPHONE SETTINGS - Dialing Mode Your ClearSounds® CSC500 comes from the factory with touch-tone service only. - One-Touch Memory Setting & Dialing Your phone allows you to program 11 frequently dialed numbers: 8 photo dials and 3 standard memory dials. Each memory key can store up to 32 digits. You can insert a 3 second pause into dialing or memory storage in order to access custom and telebanking services, long distance, calling cards, etc. Press the RD./P button at the desired point in the number to insert the pause. Storing Memory Numbers (while the telephone is not in use) 1. Lift the handset or press the speakerphone key (you will continue to hear dial done throughout the process. This is normal). 2. Press the Store key and enter the number you want to store. 3. Press the desired memory key. 4. Press the Store memory key again and the number is now saved. 5. Repeat for each Memory dial key you want to use (you do not need to hang up between each new number you are storing). After storing the 8 Photo Memory Numbers, you may want to utilize the Memory Card to write down the name or phone number that corresponds with each Photo Key. The Memory Card is located on the right side of the phone. 13 – ENGLISH Dialing from Memory Numbers 1. Lift the handset or press the speakerphone key. 2. Press one of the memory dial keys and the phone will begin to dial. NOTE: Entering a new number in the same location will automatically erase the previous number. To “erase” a current memory key number, store “1” in the memory location. - Inserting Photos in Memory Buttons 1. Cut your photo using the template provided as a guide. 2. Remove the transparent cover of the memory key and insert the photo and replace the cover or slide the photo in the top slot of the cover. - Mute Setting During a conversation, you can temporarily switch your phone’s microphone off to have a private, off-line conversation by using the MUTE feature. The party on the telephone cannot hear you but you can hear them. A conversation can be muted while using the speakerphone or handset. To mute your call any time during the conversation: 1. Press the Mute Key once to activate the mu...