Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Note: Subscription is required to use the Voice Mail service. 12 – ENGLISH THE CALLER ID THE CALLER ID NOTE: In order to utilize the Caller ID features, you must subscribe to Caller ID service through your local phone company. There are fees for Caller ID services, and it may not be available in all areas. This product can provide information only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment. Important: When using the Caller ID features, please note it is only available at Caller ID mode (CLIP icon turns on). If the CLIP icon is off, press button once. Receiving a Call (Can be stored up to 64 calls) • If an incorrect, invalid or incomplete Caller ID signal is received, the display shows NO NUMBER. • If only the caller’s phone number is received, the display shows the caller’s phone number with the time and date it was received. The NEW icon turns on and NEW CALL LED blinks. • If both the caller’s name and phone number are received, the display shows the caller’s name and phone number, with the time and date it was received. The “NEW” icon turns on and NEW CALL LED blinks. Note: If the caller’s name has more than 16 characters, only the first 16 characters will be displayed. • Your unit displays incoming call waiting Caller ID information while you are on another call. If you receive a call while the display shows the CALL WAITING icon. Note: The Call Waiting information will be disappear 20 seconds after you review it. • If the name and number are not available due to the caller’s restriction, the display shows PRIVATE with the time and date received. The NEW icon turns on and NEW CALL LED blinks. • If the name and number are not available, the display will show OUT OF AREA with the call’s time and date.The NEW icon turns on and NEW CALL LED blinks. • If a long distance call message is received, the display will show LONG DISTANCE with the call’s time and date. The NEW icon turns on and NEW CALL LED blinks. Please Note: 1. If the Caller ID memory is full, the oldest data will be removed on a first-in/ first-out basis. 2. If the Caller ID information received duplicates another call in memory, the time/date will be updated and the REPEAT icon will be lit. 3. If no key is pressed within 20 seconds, the display will display the total call counter, new call counter, current time and date. 13 – ENGLISH View the Caller ID Memory Press to review more recent calls. The CALL# will decrease. After you view the most recent data in memory, the display will show END OF LIST. Press to review older calls. The CALL# will increase. After you view the oldest data in memory, the display will show END OF LIST. If the data in memory is being reviewed for the first time, the NEW icon will be lit. The NEW CALL LED will turn off if you review the data. If no key is pressed within 20 seconds, the display will display the total call counter, new call counter, current time and date. Erase The Caller ID Memory 1. Select the required Caller ID memory location by using the or button. 2. To delete single memory, press DELETE button once.The display will show the DELETE?. Press DELETE button for 2 seconds. The data for that call will be erased, and the CALL# and Caller ID information will be updated. -OR- To delete all entire memory, press and hold DELETE button until the display shows DELETE ALL?. Press DELETE for 2 seconds until NO CALLS appears on the display. Both the total call and new call counters will become zero, and the current time and date will be displayed. Call Back (Redial) From The Caller ID Memory With the handset hung up on the base. 1. Select the required Caller ID memory location by pressing or . 2. Press DIAL button, the speakerphone will on automatically and dial the selected number. -OR- Lift the handset or press the button, select the required Caller ID memory location by pressing or , then press DIAL button. Note: If the Caller ID number is 10 digits, press DIAL button once, the unit will insert “1” before the Caller ID number automatically. You can press button to select insert “1” or not. Press DIAL again, the speakerphone will turn on automatically and dial the display number. 14 – ENGLISH Copy From The Caller ID To The Phonebook You can copy Caller ID information to the phone book while you are reviewing the Caller ID information. 1. Select the required Caller ID memory location by pressing or . 2. Press and hold MENU button for two seconds, display will show COPY TO MEMORY. 3. Press DIAL button, display will show SAVED!. TROUBLESHOOTING GUIDE No dial tone 1. Check that all phone cord connections (including the curly cord) and AC Adapter are securely plugged into the telephone & wall jack. 2. Check that the phone is in the correct dialing mode, Touch-Tone / Pulse Setting. 3. Plug another phone into the jack to make sure your phone service is functioning properly. Call will not dial or dials very slowly 1. Check that the phone is in...