Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
The Phone Book Important: When using the phone book features, please note it is only available at phone book mode ( icon turns on). If the icon is off, press button once. Storing numbers in the phone book (Can be stored up to 30 lists) 1. Press and release the MENU button until STORE NUMBER is shown. 2. Press the DIAL button. The cursor will flash in the first position. 3. Enter the required telephone number with a maximum of 22 digits using the number pad and confirm with DIAL button. 4. Enter the required name with a maximum of 16 letters. The next section will tell you how to enter names. 5. Confirm with DIAL button. The display now shows NAME RECORDING. 6. To record voice, hold down DIAL button, speak clearly into microphone after a beep and “VOICE” icon flashing. Release the button when you finished or the unit will stop recording after 3 seconds. The voice prompt will then be played automatically. 7. You can repeat step 2 to 6 to enter more numbers or press button to exit. Note: When the memory location is full, FULL will displayed. How To Enter Names The number buttons are also inscribed with letters for entering the name. By repeatedly pressing the appropriate button, upper case letters as well as numbers and special characters can be entered. Overview: Button Letters/symbols 1 [Space character] + & - / 1 2 A...................................................B C 2 3 D...................................................E F 3 4 G...................................................H I 4 5 J.....................................................K L 5 6 M...................................................N O 6 7 P....................................................Q R S 7 8 T....................................................U V 8 9 W...................................................X Y Z 9 * ‘.....................................................@ ( ) * 0 ,...................................................... : ; ? 0 # $..................................................._ % ! # Incorrect entries can be deleted with DELETE button. To do this, move the cursor the correct position using or and then press DELETE button. To Review The Phonebook Memory 1. Press and release button, until icon is shown. (If you have selected the VOICE feature ON – immediately after pressing and releasing the button - the phone will announce the mode selected “Phonebook” or “Caller ID”. 2. Review the stored phone number by pressing or , or enter the initial letter of the name of the person you wish to call using the number pad. After a short time, the display will show the first stored telephone number with this initial letter, say the name and VOICE icon is shown if it was recorded, or voice the telephone number. You can now search for further numbers under this letter by pressing . Please Note: • If no telephone number is stored, the display will show EMPTY. • After you view all the calls in memory, the display will show END OF LIST. To Dial A Number From The Phonebook 1. With the required telephone number showing on the display (step above), press DIAL button. The telephone dials out the displayed telephone number automatically in speakerphone mode. 2. The display shows dialed out telephone number and counting timer. -OR- 1. Pick up the handset or press button (the speaker LED will light) and wait for a dial tone. 2. Press and release button, until icon is shown. 3. Review the stored phone number by pressing or . 4. Press DIAL button. Recording / Editing / Deleting Voice Prompt Of Name Of Phonebook With Caller ID service activated, when an incoming call is received, the unit will display and announce the caller’s phone number. If the caller’s phone number is stored in the phonebook, caller’s name will be displayed too. If the voice prompt is recorded for this phone number, the unit will announce the voice prompt recorded instead of the caller’s phone number. 1. Press and release the MENU button until the “NAME RECORDING” is shown. 2. Press the DIAL button. A list of the phone book entries will be display. 3. Press or to select the list you like to record a voice or name for it. 4. To record or edit the voice, hold down DIAL button. Speak clearly into the microphone after a beep and “VOICE” icon flashing. Release the button when you are finished or the unit will stop recording after 3 seconds. The new voice prompt will then be played automatically. Note: To delete the voice prompt recorded, press DELETE button while the voice prompt is playing. 5. Repeat step 3 to 4 to edit or delete more entries or exit the set- up mode by pressing the button. To Edit The Phonebook Memory 1. Press and release button, icon is shown. 2. Select the required location from the phone book by pressing or . 3. Press and hold MENU button for two seconds. The display will show EDIT? 4. Press DIAL button, the first digit of the selected phone number will flash. 5. You can move the cursor to the required position by pressing or . To delete the digit, press...