Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Much like a turbocharger, the blower distributes an optimum air-to-gas mixture pushing exhaust gases through the highly restricted flue baffle. The end result is the most efficient atmospheric gas product on the market with a .70 Energy Factor (EF). INSTALLATION FRIENDLY • Allows for easy replacement of standard atmospheric vent heaters. • Easily connects to existing B-vent. FAN-ASSISTED, CATEGORY 1 APPLIANCE 24V ELECTRONIC CONTROLS • Tighter differential for more consistent hot water delivery. ELECTRONIC IGNITION • The durable hot surface ignitor eliminates pilot relight issues (no standing pilot). LCD USER INTERFACE • Easy-to-read, eye level display. Simple temperature settings and adjustments. Service diagnostics are in plain text. POWERED ANODE ROD • Powered anodes are non-sacrificial, so they do not deplete over time. Additionally, they provide exceptional performance in all water conditions. MEETS ENERGY-EFFICIENCY REQUIREMENTS FOR MOST GAS UTILITY REBATE PROGRAMS, AND MEETS ENERGY STAR® REQUIREMENTS. DURABLE TAMPER-RESISTANT BRASS DRAIN VALVE DIFFUSER DIP TUBE • Helps reduce lime and sediment buildup, maximizes hot water output. • Made from long-lasting PEX cross-linked polymer. GREEN CHOICE® GAS BURNER • Patented “Eco-Friendly” Green Choice® gas burner reduces NOx emissions by 33% compared to standard burners and meets low NOx requirements of less than 40ng/j. CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE CODE COMPLIANCE: UBC, CEC, SBCC, CABO, HUD, BOCA NATIONAL CODES, CURRENT EDITION ASHRAE/IESNA 90.1 AND 2004 NAECA STANDARDS DESIGN-CERTIFIED BY CSA INTERNATIONAL • According to ANSI Z21.10.1 - 4.1 CSA Standards governing storage-type water heaters. *For complete warranty information consult the written warranty of American Water Heaters found at or call (800) 456-9805. Copyright© by American® Water Heaters 2010. All rights reserved. NRGSS01010 PCG6240T403NOV and PCG6250T403NOV ® No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters. Residential High Efficiency Gas MODEL GALLON ENERGY BTU INPUT RECOVERY FIRST FOAM DIMENSIONS IN INCHES DRAFT HOOD OUTLET SHIPPING WEIGHT (LBS)NUMBER CAPACITY FACTOR PER HOUR AT 90° RISE HOUR RATING THICKNESS (INCHES) A B C D E F PCG6240T403NOV 40 .70 40,000 43 70 GPH 2 20 61-3/4 58 51-1/2 23-1/4 25 3 or 4 157 PCG6250T403NOV 50 .70 40,000 43 81 GPH 2 22 60-5/8 57-1/8 50-1/2 25-1/4 27 3 or 4 171 All dimension in inches. Recovery capacity based on actual performance tests. Water Connections – 3/4” on all models. Not available in LP gas (Propane). Certified for installations up to 55 00 ft. elevations. 1/2” B C A D F 8” GAS VALVE DRAIN VALVE HOT CONNECTION COLD CONNECTION ANODE ROD ON/OFF SWITCH DRAFT HOOD T&P VALVE E TOP VIEW FRONT VIEW Maximum Hydrostatic Working Pressure: 150 PSI Flammable Vapor Ignition Resistant Water Heaters This FVIR design meets the American National Standards Institute standards (ANSI Z21.10.1 - 4.1 CSA Standards) that deal with the accidental or unintended ignition of flammable vapors outside the water heater, such as those emitted by gasoline. Residential Gas High Efficiency Water Heater Specification Residential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA4.1 standard. Heaters shall meet or exceed the Federal Energy Efficiency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted and insulated with a non-CFC foam to reduce standby heat loss. The tank must be design certified for 300 PSI test pressure and 150 working pressure. Distributed By: Order Entry and Sales 500 Princeton Road (FEDEX, UPS) Johnson City, TN 37601-2030 P.O. Box 4808 (Mailing) Johnson City, TN 37602-4808 (800) 937-1037 FAX (800) 581-7224 Warranty and Service 500 Princeton Road (FEDEX, UPS) Johnson City, TN 37601-2030 P.O. Box 1597 (Mailing) Johnson City, TN 37605-1597 (800) 456-980...