Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Start the call The call period. The two-way radio operates on the concept of a push-to-talk session or call period. The push-to-talk call period begins with the first transmission and ends when there has been notraffic on the channel for 10 seconds. The keypad cannot be used for any other feature. However, it is possible to place a PBX call. The 'start transmit ' sound indicates that you can start talking' press and release the press the 'talk ' button- 'talk' button (press and hold down the key) talk with the handset 2 inches (5 cm) away The Mobile IPTouch 610 WLAN then enters the waiting state where it monitors the channel for up to 10 seconds release the 'talk ' button Receiving a call Upon receiving a PTT transmission, the phone plays the 'receiving alert' sound and enters the receive state. In this state the phone receives all conversations on the selected channel. The phone will ignore the Talk key while in the receive state. The screen shows the current active channel, the caller ID information of the current transmitter, and an indication that the phone is receiving abroadcast transmission. During a 'PBX' conversation, the IP Touch 610 WLAN is not able to receive a PTT transmission. At the end of a transmission, the phone enters the waiting state where it monitors the channel for up to 10 seconds and displays 'Waiting' on the screen. If no other transmission occurs within 10 seconds the phone plays the 'end call' sound and reverts to idle state. 10 Selecting a channel To add channels to the default list of channels, see the channels subscription feature. Making a call on another channel You may need to make a call on another channel than the one defined by default. You must first subscribe to new channels. go to the channel and select it OK OK Push to talk OK OK Default Channel OK OK OK press and release the 'talk' button ( twice) select the channel using the navigator or the volume level adjustment keys start the call ('talk' key pressed and held down) OK OR OK 4 Push to Talk (IP Touch 610 WLAN) Precautions for use/Declaration of compliance Other Other • Precautions for use • To limit the risk of interference, people with pacemakers (and other medical devices) must keep the wireless telephone away from their equipment. • The headset may retain magnetic elements. • Operation of the wireless telephone may be accompanied by a faint noise that may be detected by persons wearing a hearing aid. These persons should use a headset that is compatible with their hearing aid device. • This apparatus complies with part 15 of the FCC rules (and RSS-210 of Industry of Canada ). Its use is subject to the following two conditions: (1) The device must not cause any interference and (2) the device must accept all external interference likely to entail abnormal operation. • EC countries: We, Alcatel-Lucent Enterprise declare that the product Alcatel-Lucent IP Touch 310 or 610 WLAN is deemed compliant with the essential demands of Directive 1999/5/CE of the European Parliament and Council. A copy of the original of this declaration can be obtained from your installer. • This device uses a radio frequency spectrum whose use has not been harmonized in all countries. • We recommend you follow the standard acceptance procedures before using this equipment near EC respiratory assistance equipment. • You must not switch on or use your telephone near gas or inflammable liquids. • The outdoor usage of your telephone depends of your country. Contact your installer. • Declaration of compliance • Any modification made to the equipment without the express approval by Alcatel-Lucent may result in the cancellation of the utilization authorization granted to the user of the equipment. • THIS TELEPHONE MODEL COMPLIES WITH GOVERNMENT REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. This wireless telephone is a radio receiver and transmitter. It is designed and manufactured so as not to exceed the emission limits set by the United States FCC (Federal Communications Commission) regarding exposure to radio frequency emissions. The exposure standard for mobile phones uses the SAR - Specific Absorption Rate as measurement unit. Refer to the mobile phone and desktop charger User's guide for more information regarding the SAR. SAR controls are carried out using the standard operating positions specified by the FCC. The telephone is tested in transmission at its highest certified level in all the studied radio frequency bands. The standard foresees a significant safety margin to provide additional protection to consumers and to take account of any variations in the measurement. The FCC has attributed an "Equipment Authorization" certificate to this telephone model. This document presents all the SAR values noted, all compliant to FCC instructions in matters of RF emissions. The SAR values relative to this telephone model are available from the FCC, in particular in the Display Grant section of the Web site after a search...
Эта инструкция также подходит к моделям:Проводные телефоны - IP Touch 310 (1.71 mb)