1. Click on Operation->Softkeys and XML. or Click on Operation->Expansion Module . Softkeys 2.Select from “Key 1” through “Key 10” on the Top keys. or Select from "Key 1" through "Key 20" on the Bottom keys. 3.In the "Type" field, select "Flash". 4.In the "Label" field, enter a label to display on the phone for the key. 108 Model 6757i CT IP Phone User Guide Expansion Module Keys 5. Select from “Key 1” through “Key 36” (M670i) or Select from “Key 1” through “Key 60” (M675i) 6. In the "Type" field, select "Flash". 7. (M675i) In the "Label" field, enter a label to display on the phone for the key. 8. Click to save your changes. Model 6757i CT IP Phone User Guide 109 Line Line Keys and Softkeys Sprecode Key You can set a key to automatically activate specific services offered by the server by setting a key to "sprecode". For example, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically activates a service provided by the server. The value you enter for this field is dependent on the services provided by the server. Contact your System Administrator for information about available services. Configuring a Sprecode Key Aastra Web UI Use the following procedure to configure a Sprecode key on the 6757i CT IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML. or Click on Operation->Expansion Module . Softkeys 2. Select from “Key 1” through “Key 10” on the Top keys. or Select from "Key 1" through "Key 20" on the Bottom keys. 3. In the "Type" field, select Sprecode. 110 Model 6757i CT IP Phone User Guide 4. In the "Label" field, enter a label to display on the IP phone for this key. 5. In the "Value" field, enter the appropriate value for accessing specific services from the server. Note: For values to enter in this field, contact your System Administrator. 6. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the "Connected" state for this softkey. Expansion Module Keys 7. Select from “Key 1” through “Key 36” (M670i) or Select from “Key 1” through “Key 60” (M675i) 8. In the "Type" field, select Sprecode. 9. (M675i) In the "Label" field, enter a label to display on the IP phone for this key. 10. In the "Value" field, enter the appropriate value for accessing specific services from the server. Note: For values to enter in this field, contact your System Administrator. 11. Click to save your changes. Model 6757i CT IP Phone User Guide 111 Line Line Keys and Softkeys Park/Pickup Keys The IP phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers. There are two ways a user can configure this feature: • Using a static configuration • Using a programmable configuration (using keys) Note: The IP phone accepts both methods of configuration. However, to avoid redundancy, Aastra Telecom recommends you configure either a static configuration or a programmable configuration. The following paragraphs describe the park and pickup methods of configuration on the IP phones. Park/Pickup Static Configuration You can configure a static configuration for parking and picking up a call using the Aastra Web UI at Basic Settings->Preferences->General. By entering the appropriate value in the "Park Call" and "Pickup Parked Call" fields, you tell the phone where to park a live call and where to pickup the parked call. 112 Model 6757i CT IP Phone User Guide On the IP phone UI, the static configuration method displays the following: • When a call comes in, and you pickup the handset, the default label of "Park" displays on the Phone UI. • After pressing the "Park" key to park the call, the default label of "Pickup" displays on the phone UI. The values you enter in the Aastra Web UI for the Park/Pickup call feature are dependant on your type of server. The following table provides the values you enter for the "Park Call" and "Pickup Parked Call" fields in the Aastra Web UI. Park/Pickup Call Server Configuration Values Server Park Values* Pickup Values* Asterisk 700 700 Sylantro *98 *99 BroadWorks *68 *88 ININ PBX callpark pickup *Leave "value" fields blank to disable the park and pickup feature. Model 6757i CT IP Phone User Guide 113 Line Line Keys and Softkeys Configuring Park /Pickup using Static Configuration Use the following procedure to configure the Park/Pickup call feature using the static configuration method. Note: Aastra recommends you configure either the static or the programmable configuration, but not both. Aastra Web UI 1. Click on Basic Settings->Preferences->General. 2. Enter a server value in the Park Call field to which incoming live calls are parked. Note: For values to enter in this field, see the table “Park/Pickup Call Server Configuration Values” on page 113. 3. Enter a server value in the "Pickup Parked Call" field. Note: For values to enter in this field...
)
Войти: