Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
3. Press TIME. The minute field blinks. Use the VOLUME buttons to change the minutes. 4. Press TIME to continue through the settings: Music Auto On, hour and minutes and Music Auto Off, hour and minutes. 5. After you have entered Music Auto Off minutes, press TIME to return to Normal Time display. Note: You can enable or disable the AUTO function. The word “Auto” will appear on the display when Auto Function is on. See Music Settings/Auto On/Off. Music Settings Music Source You can select from four music sources: • AUX—Any audio source you connect, such as an external CD player or a stereo system. • AM radio • FM radio • CD player (NC300WH CD Player). This source can also be used to hook up an external audio device if the system does not include an NC300 CD player. For CD functionality, see Master Station Operation/CD Player Operation. To select a music source: 1. Press POWER to turn on music. 2. Press SOURCE repeatedly to cycle through AUX, AM, FM, and CD until you reach the music source you prefer. Music Auto On/Off You can set the system to turn music on automatically at a predetermined time and to turn the music off automatically at a predetermined time. 1. Set the Auto On/Off times as described under Clock Settings. 2. Press the AUTO button to toggle between On and Off. When the Auto function is on, AUTO appears on the display. Radio Settings You can tune in FM or AM radio stations, and can set up to 8 presets on each band. Tune the Radio To tune a radio station: 1. Press POWER to turn on the music. 2. Select FM or AM. See Music Settings/Music Source for instructions. 3. Use TUNE UP or TUNE DOWN to find a station. If you press and release, within 1 second, TUNE UP or TUNE DOWN, the tuner goes into Seek Mode and finds the next station with a strong signal. If you press and hold TUNE UP or TUNE DOWN, the tuner goes into Scan Mode and scans all frequencies until you release the button. Note: For the first two seconds, the tuner scans at slow speed to allow for fine tuning. After two seconds, the tuner scans at fast speed. Preset Radio Stations To preset radio stations: 1. Press POWER to turn on the music. 2. Select FM or AM. See Music Settings/Music Source for instructions. 3. Use TUNE UP or TUNE DOWN to find a station. See Tune the Radio section for seek and scan functions. 4. Simultaneously press TUNE UP and TUNE DOWN to enter Store Preset mode. The display shows PRESET and a preset number. 5. If you don’t want to assign a preset number, wait 5 seconds and your selected radio station will automatically be assigned to the preset number that is displayed. If you want to select the preset number, press the PRESET button repeatedly to cycle through numbers1-8 until you reach the preset number you want. 6. Wait 5 seconds. The display updates to show the new station for the selected preset number. Note: This activity can be cancelled at any time during the process by pressing TUNE UP and TUNE DOWN simultaneously again, and no new preset is stored. Scan Mode Two scan modes are available. The scan mode for the room stations is set at the master. The two scan modes are identified in the next figure. To set your scan mode: • Scan 1—Allows the Indoor/Outdoor Remote stations to scan through the four music sources (AUX, AM, FM, CD). On radio bands AM and FM, Scan 1 scans through the preset radio stations: AM 1-8 and FM 1-8. See Music Settings/Radio Settings for information on how to preset radio stations. • Scan 2—Allows Indoor/Outdoor remote stations to scan through the four music sources (AUX, AM, FM, CD.) On radio bands AM and FM, Scan 2 scans all strong stations before moving on to the next source. To set the Scan Mode: To change the scan mode, simultaneously press and release PRESET and SOURCE again. The display shows either Scan1 or Scan2. Note: Exit out of scan mode by pressing PRESET and SOURCE or waiting for the display to show the clock time again. Audio Settings Volume • Music—Adjusts the volume for system music. • Master Station—Adjusts the volume for the speaker on the Master Station only. • Intercom—Adjusts the volume for the system intercom. Tone • Loudness • Treble • Bass To change volume and tone settings: 1. Press POWER to turn on music. The system defaults to music volume. Use VOLUME UP and VOLUME DOWN to adjust the music volume from 0-29. All other audio settings return to music volume after 5 seconds. 2. Press TONE. Master Volume appears. This controls the volume for the Master Station speaker only. Use VOLUME UP and VOLUME DOWN to adjust the Master Volume from 0-29. Note: When music is off, use VOLUME UP and VOLUME DOWN to adjust Master Volume. 3. Press TONE. The Loudness function appears. Press VOLUME UP to turn Loudness on. Press VOLUME DOWN to turn Loudness off. 4. Press TONE. The Treble function appears. Use VOLUME UP and VOLUME DOWN to adjust the treble from 0-14. 5. Press TONE. The Bass function appears. Use VOLUME UP and VOLUME DOWN to adjust the bass from 0-14. 6. Press TONE. Intercom V...
Эта инструкция также подходит к моделям:Проводные телефоны - NM100 series (492.95 kb)