Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
See the User Guide for full information. Place the handset into the charger for a minimum of two hours. If you want to Then Remove the Battery Pack Press down on the latch on the Battery Pack at the back of the handset and pull the Battery Pack towards you. The Battery Pack releases outward. Replace the Battery Pack Slide the lip of the Battery Pack into the bottom of the cavity. Push the top of the Battery Pack until it snaps into place. You should not have to force it into the handset. Turn handset on Press and hold the END key until two chirps sound. Turn handset off Press and hold the END key. One chirp will sound. If you are in a call, hang up first, then turn off the handset. Unlock the keypad Press the Unlk softkey, then # , to unlock the keypad. Lock the keypad Press the Cfg softkey then NavOK, to manually lock the keypad. Make an internal call Press the START key, wait for a dial tone, then dial the extension. Make an external call Press the START key, wait for a dial tone, then dial the number just as you would from your desk phone. Select a line If multiple lines are available, your handset will default to line 1. If a different line is desired, press LINE and the number key corresponding to the desired line. You will hear a dial tone. Dial a number Once you hear a dial tone, press the number keys to dial the number. Answer a call To answer a call, press the START key and hold the earpiece to your ear. You may also activate the speakerphone function or use a headset. Answer a call on If you are on a call and hear subdued ringing, a call is coming in on a second line. The line a second line number on the display will be flashing. To answer this call, put your first call on hold and press the LINE key, then the line number of the second call. Answer with headset Press any key (other than END) to answer a call when a headset is plugged in. Silence while ringing Press the END key to silence the ring. Change the ring volume Press the up/down volume buttons on the side of the handset during ringing. Activate or deactivate Press the Spkr softkey and speak towards the handset. Note that this feature may not be the speakerphone activated in your communication server. Adjust the Press the volume up/down buttons on the side of the handset during the call. speaker volume Adjust the Press the volume up/down buttons on the side of the handset during the call. headset volume Place a call on hold Press the More softkey and then press the Hold softkey. Resume a held call Press the LINE key followed by the line number key. Mute the microphone Press the More softkey and then press the Mute softkey. End the call Press the END key. Be sure to do this at the end of each call to return to the standby mode. Change profile Press the Prof softkey in standby mode and use the Nav keys to select a new profile. The selected profile is marked with an asterisk (*). Display additional Press the FCN key while off hook to display additional features that have been customized features for your communication server. Turn on the backlight The backlight comes on when any key is pressed or when there is an incoming call and stays on for 10 seconds. It turns off after 10 seconds if another key is not pressed within that period. PTT Operation Summary The PTT feature allows the Avaya 3645 handsets to operate in a group broadcast mode, where a single handset can transmit to multiple listeners, like a two-way radio. If you want to Then Make a PTT call To call on the default channel, from standby mode press and hold the TALK button. Wait for the display to show Transmitting and then hold the handset approximately two inches from your mouth and speak. Respond to a PTT call Press and hold the TALK button during the 10-second wait period. End wait period Press End. Select a different Press and release the TALK button. Select a different channel from the list. Use the Nav PTT channel keys or volume side buttons to highlight the desired channel. Press TALK to transmit. End one PTT call and Press the END key to exit the PTT call. Press and release the TALK button and select a start another one different channel from the list. Press and hold the TALK button to begin transmitting on the different channel. Receive a PTT call while Press the END key to end the telephone call. Now you can hear the PTT call. in a telephone call Transmit on the Press and release the TALK button. Select the priority channel from the list. Press and hold priority channel TALK, then speak. End a PTT call Press the END key to exit the PTT call. Change PTT volume Use the Up and Down volume buttons on the side of the handset while transmitting receiving a PTT call. Answer a telephone Press the START key. PTT transmissions will be pre-empted by the telephone call during a PTT transmission Start a telephone Press the START key and dial the number. PTT transmissions will be pre-empted call during a PTT telephone call. transmission Turn off PTT Change to a different profile disabl...