Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
800-158-301. FEBRUARY 2007 (REV.2.0) U.S. PATENT NO. D499,392 © 2007 ClearOne Communications, Inc. All rights reserved. No part of this document may be reproduced in any form or by any means without written permission from ClearOne Communications. Printed in the United States of America. ClearOne reserves specific privileges. Inforfrmation in this document is subject to change without notice MAX IP User’s Guide 1 UNPACKING AND SETTING UP YOUR MAX IP CONFERENCE PHONE For information on unpacking and setting up your MAX IP conference phone, please refer to the MAX IP Administrator’s Guide. KEYPAD FUNCTIONS MAX IP USER’S GUIDE CONFERENCE CLEAR ON / OFF HOLD MUTE VOLUME PROG. REDIAL EDIT PHONEBOOK Key Function FIGURE 1 MAX IP keypad functions LCD DISPLAY FIGURE 2 MAX IP LCD display USING THE MAX IP PHONE The following paragraphs describe how to use your MAX IP phone. TO MAKE A CALL 1. Press the ON/OFF key to activate the phone. You hear a dial tone. (The phone icon and line states appear when the phone is active (see figure 3).) The line states are displayed at the far right of the display as “1” for line 1 and “2” for line 2, with the current line state being represented by the letter “c” for “connected,” “i” for “incoming,” “h” for “hold,” or “r” for “remote hold” (the line is on hold at the far end). FIGURE 3 MAX IP phone icon 2. Dial the number as you would on a standard phone. The number appears on the LCD screen. > Note: You can also predial the number while in Standby mode and press the ON/OFF key to connect the call. To add a pause to the number you are predialing, press and hold the pound (#) key. TO ANSWER A CALL 1. Press any key (except “*” key, MUTE, VOLUME UP or VOLUME DOWN). When there is an incoming call, the phone rings (unless the ringer is turned off) and the phone LEDs and phone icon on the LCD screen flash. TO END A CALL 1. Press the ON/OFF key. TO TURN THE RINGER ON/OFF (IN STANDBY) 1. Press and hold the star key (*). FIGURE 4 MAX IP ringer off icon Technical Services: 800.283.5936 TO MUTE DURING RINGING 1. Press the star (*) or the MUTE key to mute the ringer for the duration of the ringing. > Note: This only mutes the current ring; the ringer is unmuted for subsequent calls. TO ADJUST RINGER VOLUME 1. While the phone is ringing, press VOLUME UP or VOLUME DOWN. 2. While the phone is inactive, press VOLUME UP or VOLUME DOWN. The ringer melody plays once at the new level. TO ADJUST LOUDSPEAKER VOLUME 1. Press the VOLUME UP key while on a call to increase volume. 2. Press the VOLUME DOWN key while on a call to decrease volume. TO ACCESS YOUR HELP LINE 1. While in Standby mode, press and hold the 0 key for 2 seconds. This feature must be programmed before use. TO STORE A NUMBER IN THE PHONEBOOK 1. Enter the number while the phone is in standby (inactive) mode. 2. Press and hold the PHONEBOOK key until the Phonebook and Program icons appear. FIGURE 5 MAX IP phonebook and program icons 3. Assign a Phonebook location (0–9) by pressing the corresponding number key. 4. Press PHONEBOOK again to save the entry. You hear a confirmation tone. 5. To exit Phonebook Edit mode before saving the entry, press CLEAR. TO MAKE A CALL USING THE PHONEBOOK 1. Press the PHONEBOOK key. 2. Press the number (0-9) that corresponds with the stored phone number you want to dial. The number is displayed on the LCD screen. 3. Press the ON/OFF key to dial the number. TO MAKE AN OUTBOUND THREE-WAY CALL 1. Press the CONFERENCE key. The first party is put on hold and you are connected to a second line dial tone. OR press the HOLD key to place the current call on hold, then press ON/OFF key to obtain the second line. 2. Dial the second party’s phone number. > Note: Stored numbers are not available for dialing a second party. If you receive a busy signal or are routed to voicemail, then press the ON/OFF key to terminate the call and return to the first party. 3. Press the CONFERENCE key to join all three parties in a conference call. MAX IP User’s Guide USING THE PHONE IN A THREE-WAY CALL 1. Press the HOLD key to place both lines on hold. > Note: The LEDs flash red when a call is on hold. Press the HOLD key a second time to take both lines off hold. 2. Press the ON/OFF key to hang up both lines. 3. If either of the other parties hangs up during the three-way call, the remaining party stays connected to the call. TO MAKE AN OUTBOUND CALL WHILE ON ANOTHER CALL 1. Press the HOLD key and then press the ON/OFF key. The first party is put on hold and you are connected to a second line dial tone. 2. Dial the second party’s phone number. > Note: Stored numbers are not available for dialing a second party. If you receive a busy signal or are routed to voicemail, then press the ON/OFF key to terminate the call and return to the first party. 3. Press the HOLD key to toggle between the first and second parties. > Note: You cannot join the first and second parties together in a three-way call after calling the second party in this fashion; a...