Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
IMPORTANT: Always disconnect HA 30/40 from the telephone before replacing the battery! 2 Installation: 1. Unplug the handset cord from your telephone base. Insert this plug into the jack at the front of the Handset Amplifier. 2. Connect the Handset Amplifier to your telephone base as shown. 3. Pick up the handset. If there is a dial tone, you have installed the Handset Amplifier correctly. Volume Control Adjust the volume to the most comfortable listening level by moving the volume control slide switch. E N G L I S H Boost Button (HA-40 only) Press and hold down the Boost button for more amplification. It also eliminates any background noise and feedback by muting the microphone in your handset. You must remember to release the button when you speak so that the other party can hear you, then press and hold the boost button again when they speak. 4 Tone Control Move the Tone Selector switch right or left to a position that allows you to hear clearly. This will give you the optimum speech clarity so that you can distinguish similar sounds such as “chair” and “share”. Battery Indicator The battery indicator light comes on every time you lift your handset to indicate that the battery level is okay. If the indicator light does not come on, the battery needs to be replaced. When battery is drained, the handset will still be operable If you move the volume control switch to the minimum position. While at any other setting, the handset will not work when the battery is drained. For normal usage, an alkaline battery will last for 6 - 12 months, while a regular battery will last 4 - 10 months. E N G L I S H 6 Regulatory Compliance Part 68 of FCC Rules Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. A plug and jack used to connect this HA30 / HA40 to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug, RJ11 USOC, is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this telephone equipment, the HA30 / HA40 super phone ringer causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will 8 E N G L I S H provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this telephone equipment, for repair or warranty information, please contact Walker / Ameriphone, 1-800-874-3005. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. DO NOT DISASSEMBLE THIS EQUIPMENT. This telephone equipment is not intended to be repaired and it contains no repairable parts. Opening the equipment or any attempt to perform repairs will void the warranty. For service or repairs, call 1-800-874-3005. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this telephone equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This telephone equipment is hearing aid compatible. We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connec...
Эта инструкция также подходит к моделям:Проводные телефоны - HA40 (212.54 kb)