Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
would be a point in time when one less backup is available, there is some risk
associated with the transition.
• If there is sufficient available capacity for an extra backup set, the deletion of
existing backups is not necessary; hence there is no additional risk associated
with the transition.
One time or phased implementation
Since the two products have been proven to coexist, no additional hardware is required
to have both systems operational simultaneously. You can choose between a ful or
phased implementation. This allows administrators the flexibility to gain experience
with Application Recovery Manager in a subset of the former FRS environment, should
they choose to.
Limitations
• Backups created using FRS cannot be restored using Application Recovery
Manager, and vice versa.
• Only one VSS backup can be performed on a given server at a time, regardless
of the backup application used. This is a VSS limitation.
• Data mount points on the backup host that is an FRS Recovery Server, should not
be shared between the two applications.
• If you install AutoPass during the Application Recovery Manager installation and
you later uninstal Application Recovery Manager, the FRS licenses can no longer
be used. If you want to keep the FRS licenses, do not install AutoPass during the
Application Recovery Manager installation. Application Recovery Manager
offers additional options for importing the licenses, see the HP Application
Recovery Manager software instal ation and licensing guide.
Transition procedure
1. Update the Host Bus Adapters, drivers, firmware, MPIO, and VSS Provider to
at least the minimum supported configuration of Application Recovery Manager.
See the HP Application Recovery Manager Instant Recovery & Zero Downtime
Backup Support Matrix.
2. Instal the HP VDS provider. For the required VDS provider version, see the HP
Application Recovery Manager Instant Recovery & Zero Downtime Backup Support
Matrix.
3. If necessary, delete the oldest set of FRS backups using the FRS application, to
allow enough space for the intended backup(s). This may be done at one time
or optionally as an iterative process, where a single FRS storage group backup
is deleted and recreated using Application Recovery Manager backup and the
process is repeated.
Transitioning from HP StorageWorks Fast Recovery Solution to HP Application Recovery
5
Manager software
...Эта инструкция также подходит к моделям:
Программное обеспечение - HP Application Rvry Management 6.1 Multi OS E-Media (60.73 kb)