Оценок - , средний балл:
(
)
)
Производитель: Acer
Размер: 1.11 mb
Название файла: projector_manual_4683.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector Power cord VGA cable Composite video cable AC adapter Carrying case Quick start guide User’s Guide Acer Projector Quick Start Guide 3 English Projector Overview Projector Outlook Front / upper side Rear side # Description # Description 1 Control panel 3 Projection lens 2 Focus ring 4 Elevator foot # Description # Description 1 DC IN connector 4 Kensington lock port 2 Composite video input connector 5 Tripod socket 3 PC analog signal/HDTV/Component video input connector 1 2 4 3 1 2 3 4 5 4 Control Panel English 12 3 4 65 # Function Description 1 TEMP Temp Indicator LED 2 LAMP Lamp Indicator LED 3 Four directional select keys Use to select items or make adjustments to your selection. 4 MENU • Press "MENU" to launch the onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. 5 SOURCE Press "SOURCE" to choose RGB, Component, S-Video, Composite, DVI, HDTV and HDMI sources. 6 POWER See the contents in "Turning the Projector On/Off" section. 5 Getting Started English Connecting the Projector DVD player, Set-top Box HDTV receiver Video Output Y Y 1 RB G RB G HDTV adapter 2 D-Sub D-Sub 3 VGA, DVI # Description 1 Composite video cable 2 VGA to component/HDTV adapter 3 VGA cable Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. 6 English Turning the Projector On/Off Turning On the Projector 1 Ensure that the AC adapter, power cord and signal cable are securely connected. The Power LED will flash red. 2 Turn on the lamp by pressing "Power" button on the control panel, and the Power LED will turn blue. 3 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If the screen displays "Lock" & "Source" icons, it means the projector locks on this source type and there is no such type of input signal found. • If the screen displays "No Signal", please make sure the signal cables are securely connected. • If you connect multiple sources at the same time, using the "Source" button on control panel to switch between inputs. POWER 1 7 Turning Off the Projector 1 To turn off the projector press the "Power" button twice. The message below will display onscreen for 5 seconds. "Please press power button again to complete the shutdown process." 2 Immediately after powering off, the Power indicator LED will flash RED rapidly and the fan(s) will continue to operate for about 20 seconds. This is to ensure that the system cools correctly. 3 Once the system has finished cooling, the "Power" indicator LED will turn solid RED which means the projector enter standby mode. 4 It is now safe to unplug the power cord. Warning: Do not turn on the projector immediately after powering off. Warning indicators: • If the projector automatically shuts down and the TEMP indicator turns solid RED, this indicates that the projector has overheated. The message below will display onscreen if this is about to happen: "Projector Overheated. Lamp will automatically turn off soon." • If the TEMP indicator flashes RED and the message below is displayed onscreen, please contact your local dealer or service center: "Fan fail. Lamp will automatically turn off soon." English 8 English Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with an elevator foot for adjusting the height of image. To raise the image: 1 Turn the elevator foot to lengthen the foot. 2 Raise the image to the desired height angle. To lower the image: 1 Turn the elevator foot to shorten the foot. 2 Lower the image to the desired height angle. Elevator foot 9 How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 2.4m from the screen, good image quality is possible for image sizes 60". Note: Remind as below figure, the space of 93 cm height is required when located at 2.4m distance. Figure: Fixed distance with optimal screen size. English 10 English Desired Distance (m) < A > Screen Size Diagonal (inch) < B > W (cm) x H (cm) From base to top of image (cm) < C > 0.6 15 30 x 23 26 1.2 30 61 x 46 49 2 50 102 x 76 79 2.4 60 122 x 91 93 11 User Controls Onscreen Display (OSD) Menus The Projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Be sure to connect power and input a signal before using the OSD menus. Using the OSD menus • To open the OSD menu, press "MENU" on the control panel. • When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. • Use the keys to select the desired item and adjust the settings by...