Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации BenQ, модель MW769

Производитель: BenQ
Размер: 12.32 mb
Название файла:
Язык инструкции:iten
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Selecting a Color Temperature
The options available for color temperature* settings vary according to the signal type
selected.
1.
Cool: Makes images appear bluish white.
2.
Normal: Maintains normal colorings for white.
3.
Warm: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be "white" for various purposes.
One of the common methods of representing white color is known as the “color
temperature”. A white color with a low color temperature appears to be reddish white. A
white color with a high color temperature appears to have more blue in it.
Setting a preferred color temperature
To set a preferred color temperature:
1.
Select Color Temperature and select Warm, Normal or Cool by pressing
/
on the projector or remote control.
2.
Press
to select Color Temperature Fine Tuning and press MODE/ENTER.
The Color Temperature Fine Tuning page displays.
3.
Press /
to select the item you want to change and adjust the values by pressing
/
.
R Gain/G Gain/B Gain: Adjusts the contrast levels of Red, Green, and Blue.
R Offset/G Offset/B Offset: Adjusts the brightness levels of Red, Green, and
Blue.
4.
Press MENU/EXIT to exit and save the settings.
3D Color Management
In most installation situations, color management will not be necessary, such as in
classroom, meeting room, or lounge room situations where lights remain on, or where
building external windows allow daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms, lecture
theaters, or home theaters, should color management be considered. Color management
provides fine color control adjusent to allow for more accurate color reproduction, should
you require it.
Proper color management can only be achieved under controlled and reproducible viewing
conditions. You will need to use a colorimeter (color light meter), and provide a set of
suitable source images to measure color reproduction. These tools are not provided with
the projector, however, your projector supplier should be able to provide you with suitable
guidance, or even an experienced professional installer.
The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you
select each color, you can independently adjust its range and saturation according to your
preference.
If you have purchased a test disc which contains various color test patterns and can be
used to test the color presentation on monitors, TVs, projectors, etc. You can project any
image from the disc on the screen and enter the 3D Color Management menu to make
adjusents.
Operation
41


...

Эта инструкция также подходит к моделям:
Проекторы - MX768 (12.32 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории