Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Timestamp on Timestamp off (*) Timestamp Data prefix Data (which type can be barcode or RFID) Data suffix 12 chars Max. 32 chars -Max. 32 chars Barcode Data: If data type is barcode, it comes with this data frame format Barcode prefix Barcode Barcode suffix Max. 32 chars -Max. 32 chars Barcode: Depending on the barcode type (symbology), additional data can be added Symbology prefix AIM identifier Data (barcode) Symbology suffix Max. 4 chars 0, 2 or 3 chars -Max. 4 chars RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.8 -20 - Data Capture for Workforce in Motion Set Timestamp END of configuration Noted that the timestamp must fit the specific following format: {YY} {MM} {DD} {HH} {MM} {SS} The setting is made by scanning the 0-9 labels (Appendix 1) as on a calculator; following the timestamp format shown above. For example: to set the current time at 16th May 2007, 3.25 pm, the user will scan: -“Set Timestamp” label, -“0” label, -“7” label, -“0” label, -“5” label, -“1” label, -“6” label, -“1” label, -“5” label, -“2” label, -“5” label, -“0” label, -“0” label, -“end of config” label. Read « Set Timestamp » label START Read intermediary label Corresponding to the next digit to set for the Timestamp (from Appendix 1) Finished ? (1) Read « END of config » label END NO YES Programming procedure for “set Timestamp” option Data Capture for Workforce in Motion Set Timestamp END of configuration Noted that the timestamp must fit the specific following format: {YY} {MM} {DD} {HH} {MM} {SS} The setting is made by scanning the 0-9 labels (Appendix 1) as on a calculator; following the timestamp format shown above. For example: to set the current time at 16th May 2007, 3.25 pm, the user will scan: -“Set Timestamp” label, -“0” label, -“7” label, -“0” label, -“5” label, -“1” label, -“6” label, -“1” label, -“5” label, -“2” label, -“5” label, -“0” label, -“0” label, -“end of config” label. Read « Set Timestamp » label START Read intermediary label Corresponding to the next digit to set for the Timestamp (from Appendix 1) Finished ? (1) Read « END of config » label END NO YES Programming procedure for “set Timestamp” option RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.8 -21 - Data Capture for Workforce in Motion 1.8.2. Data Prefix/Suffix You can add a data prefix and/or suffix (strings of more than 32 characters will not be accepted) to every barcode sent to the host device. There is no data prefix or suffix in default settings. Enable data prefix Disable data prefix (*) Enable data suffix Disable data suffix (*) If enabled, a data prefix/suffix can be set as following: Start Read « « set prefix (suffix) » barcode Read intermediary label corresponding to the next character to set for the prefix (suffix) (see appendix 1) Read « end of config » barcode End Finished ? YES NO Procedure to define Data/Barcode Prefix/Suffix Data Capture for Workforce in Motion 1.8.2. Data Prefix/Suffix You can add a data prefix and/or suffix (strings of more than 32 characters will not be accepted) to every barcode sent to the host device. There is no data prefix or suffix in default settings. Enable data prefix Disable data prefix (*) Enable data suffix Disable data suffix (*) If enabled, a data prefix/suffix can be set as following: Start Read « « set prefix (suffix) » barcode Read intermediary label corresponding to the next character to set for the prefix (suffix) (see appendix 1) Read « end of config » barcode End Finished ? YES NO Procedure to define Data/Barcode Prefix/Suffix RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.8 -22 - Data Capture for Workforce in Motion Set Data prefix Set Data suffix End of configuration 1.8.3. Barcode Prefix/Suffix You can add a barcode prefix and/or suffix (strings of more than 32 characters will not be accepted) to every barcode sent to the host device. There is no barcode prefix or suffix in default settings. Enable barcode prefix Disable barcode prefix (*) Enable barcode suffix Disable barcode suffix (*) If enabled, a Barcode prefix/suffix can be set in the same manner as the Data prefix/suffix can be set: Set Barcode prefix Set Barcode suffix End of configuration Data Capture for Workforce in Motion Set Data prefix Set Data suffix End of configuration 1.8.3. Barcode Prefix/Suffix You can add a barcode prefix and/or suffix (strings of more than 32 characters will not be accepted) to every barcode sent to the host device. There is no barcode prefix or suffix in default settings. Enable barcode prefix Disable barcode prefix (*) Enable barcode suffix Disable barcode suffix (*) If enabled, a Barcode prefix/suffix can be set in the same manner as the Data prefix/suffix can be set: Set Barcode prefix Set Barcode suffix End of configuration RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.8 -23 - Data Capture for Workforce in Motion 1.8.4. AIM Symbology Identifier AIM Identifier will be transmitted at the beginning of the barcode. More i...
Эта инструкция также подходит к моделям:Проекторы - BLUETOOTH L (1D) (521 kb)