Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
Image 8-11 Load fitting file 8.5.3 Load a file from all files What is possible? A file can be loaded from the complete list of all files. How to load 1. Select first a window. 2. Click on Adjust (a). (image 8-12) The Input dialog box is displayed (b). 3. Click File and select Load (ALL) (c). A list of all filesisdisplayed in Load (All) dialog box (d). R5976924 PROJECTORTOOLSET 16/04/2009 8.Configurator,Projectoradjustmentsettings 4. Click on the desired file in the list (e) and click Open or Select (f). When a standard file is selected or a not matching custom file, Projector Toolset will ask to create a new custom source file by copying the settings of the selected file into the custom file. 5. Click OK to create a new custom source file. If Cancel is pressed the previous selected file is loaded again. The new created file canbeedited. Image 8-12 Load file from all files 8.5.4 Edit Input settings Adjustable items • Total horizontal pixels: total horizontal pixels in the source. If the value is wrong, sampling mistakes (small vertical bars in the projected image) will be seen in the image. • Active horizontal pixels: determine the width of the window on the screen. This value is normally given in thesourcespecifications. If not, adjust until full image height is displayed (no missing lines). • Horizontal start in pixels: number of pixels between the beginning of the input signal and the start of the video information in the signal. • Total vertical pixels: total vertical pixels in the source. • Active vertical pixels: number of vertical pixels determining the height of the projected image. This valueisnormallygiven in thespecifications of the source. If not, adjust until full image height is displayed (no missing lines) • Vertical start in pixels: number of pixels between the start of the input signal and start of the image on the screen. • Horizontal period in nanoseconds. How to edit 1. Select first a window. 120 R5976924 PROJECTORTOOLSET 16/04/2009 8.Configurator,Projectoradjustmentsettings 2. Click on Adjust.(image 8-13) The Input dialog box is displayed. The current used input file is indicated next to Active input file. 3. Click in the text box of the spin box of the desired item and enter the desired value with the keyboard Or, click on the up down control until the desired value is reached. Image 8-13 Adjust timings source file Once a value or a setting is changed the file name next to Active input file gets an asterisk to indicate that the file is not saved yet. When closing the Input dialog box, Projector Toolset asks to save the changes. 8.5.5 Save changes on an input file What can be done? Once a loaded file is changed, the settings can be save in the same file. R5976924 PROJECTORTOOLSET 16/04/2009 8.Configurator,Projectoradjustmentsettings When changes are made in the Input dialogboxandwhenclosingthis box without firstsaving, thesoftware asks to save the settings anyway. The save is executed on the projector. For direct save 1. Click Adjust. (image 8-14) The Input dialog box is displayed. 2. Click on File and select Save. The settings are saved in the same file on the projector. Image 8-14 Save custom source file When closing the Input dialog box, Projector Toolset asks to save the changes. 8.5.6 Rename the current input file What can be done? The current input file canberename. Not possible to rename the active file (current loaded file). How to rename, way 1 1. Click on the rename icon on the Input settings pane (a). (image 8-15) The Rename input dialog box opens (b). 2. Select the file to rename from the list (c) and click Rename (d). 122 R5976924 PROJECTORTOOLSET 16/04/2009 8.Configurator,Projectoradjustmentsettings An Input dialog box opens (e). The current name is filled out. 3. Select the current name (f) and enter a new name. Note: Only the characters a to z, A to Z, 1 to 9 and (, ), _, -, @ or allowed in a name. 4. Click OK (g). The name is changed into the new name. Image 8-15 Rename source file via icon How to rename, way 2 1. Click on Adjust (a). (image 8-16) The Input dialog box opens (b). 2. Click on File and select Rename (c). The Rename input dialog box opens (d). 3. Select the file to rename from the list (e) and click Rename (f). An Input dialog box opens. The current name is filled out (g). 4. Select the current name (h) and enter a new name. Note: Only the characters a to z, A to Z, 1 to 9 and (, ), _, -, @ or allowed in a name. 5. Click OK (i). The name is changed into the new name. R5976924 PROJECTORTOOLSET 16/04/2009 8.Configurator,Projectoradjustmentsettings Image 8-16 Rename via input settings 8.5.7 Deleting an input file What is possible? Any custom input file can be delete. It is not possible to delete standard files. Not possible to delete the active file (current loaded file). How to delete, way 1 1. Click on the delete icon on the Input settings pane (a). (image 8-17) The Delete input dialog box opens (b). 2. Select the file to delete from the list (c) and click De...