Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
The image from the peripheral equipment is transferred to each projector via wireless network. There is no need for wire connection between the transmitter and the projector. You can select one of 2 installation modes as follows. Single Mode This mode is available only between one transmitter and one receiver. Broadcast Mode This mode is available between one transmitter and 2 or more receivers. It is useful to project the same images to multiple screens. ID = B ID = B Single Mode Single Mode ID = A ID = A Single Mode Single Mode ID = A ID = A ID = A ID = A Broadcast Mode Broadcast Mode . When selecting "INPUT 3 HDMI", only Single Mode is available. "INPUT 3 HDMI" cannot be selected in the Broadcast Mode. . The projector in this manual is PLC-XF47 for example. Features and Design Table of Contents Features and Design ........................................................2 Table of Contents ...........................................................3 To the Owner . . . . . .. . . . . . . . . . . . . . . . . . .. . . . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . .4 Safety Instructions .. . . . . . . . . . . . . . . . . . .. . . . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . .5 Compliance.. . . . . . .. . . . . . . . . . . .. . . . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . . .8 Preparation.. . . . . . .. . . . . . . . . . . .. . . . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . .11 Before use 11 Part Names and Functions 12 Installation ................................................................14 Connection to external equipment 14 Connecting the AC Power Cord 15 Installing the Receiver into the Projector 16 Basic Setting and Operation. . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . . . . .. . . .17 Projector Operation 17 Turning on the Transmitter 18 Turning off the transmitter 18 Input Source Selection 19 How to Operate the Menu 19 Menu Tree 20 Flow of Installation Mode 21 Single Mode Operation ....................................................22 6/6: Mode Select & 1/6: Single Mode Setup 22 Broadcast Mode Operation. . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . . . . .. . . .26 6/6: Mode Select & 4/6: ID Number 26 Other Basic Operation. . . . . . . . . .. . . . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . .30 5/6: Key Lock 30 2/6: Image Adjust 32 3/6: Information 32 Reset Function of the projector 33 Maintenance and Care .....................................................34 Appendix. . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . .35 Troubleshooting 35 Specifications 36 Compatible Signals Specifications 38 Configurations of Terminals 39 English HD DATA WIRELESS TRANSMITTER BOX OWNER'S MANUAL To the Owner Before operating this transmitter, read this manual thoroughly and operate the transmitter properly. Operating the transmitter properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your transmitter seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section in the end of this manual. If the problem still persists, contact the dealer where you purchased the transmitter or the service center. CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT. Important Notice There are restrictions on the channels and frequencies in the countries and regions at which you can use the wireless communication. So it is forbidden to take the transmitter and the receiver outside the country or region where you purchased them. Safety Precaution WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. – If the transmitter is unused for an extended time, unplug the transmitter from the AC power outlet. NOTE: This symbol and recycle system are applied only to EU countries and not applied to the countries in the other area of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling centre. In the European Union there are ...