Оценок - 4, средний балл: 4
(
)
)
|
Фото и характеристики Sony VPL-CX21 |
Фрагмент инструкции
d TILT adjustment key Adjusts the tilt of the projector. For details, see “Projecting” on page 11. e ON/STANDBY indicator (located around the ?/1 key) Lights up or flashes under the following conditions: – Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode, you can turn it on with the ?/1 key. – Lights in green when the power is turned on, and when it is ready to operate. – Flashes in green from the projector is turned on until the projector is ready to operate. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 key. The fan runs for about 45 seconds after the power is turned off. For details, see page 14. f FOCUS +/– key Adjusts the picture focus manually. g AUTO FOCUS key Adjusts the picture focus automatically. h Status indicators • POWER SAVING Lights when the projector is in power saving mode. • TEMP (Temperature)/FAN Lights or flashes under the following conditions: – Lights when the temperature inside the projector becomes unusually high. – Flashes when the fan is broken. • LAMP/COVER Lights or flashes under the following conditions: – Lights when the lamp has reached the end of its life or reaches a high temperature. – Flashes when the lamp cover or air filter cover is not secured firmly. For details, see page 36. i AUDIO/VIDEO connector Connects to the audio output and video output, or S video output (Y/C video output) of the video equipment or the computer. Overview Location and Function of Controls j INPUT A connector (HD D-sub 15-pin, female) Inputs a computer signal, video GBR signal, component signal, or DTV signal depending on the connected equipment. Connects to the output connector of equipment using the supplied cable or an optional cable. For details, see “Connecting a Computer” on page 9 and “Connecting a VCR” on page 10. k AC IN socket Connects the supplied AC power cord. l MENU key Displays the on-screen menu. Press again to clear the menu. m ENTER/Arrow (v/V/b/B) keys Used to enter the settings of items in the menu system, select a menu, or make various adjustments. Press the center of the key when you use this key as the ENTER key. Remote Commander The keys that have the same names as those on the control panel function identically. aINPUT key bAPA (Auto Pixel Alignment) key Automatically adjusts a picture to its clearest while a signal is input from a computer. A FREEZE KEY STONE /TILT LENS AUTO FOCUS PIC MUTING AUDIO MUTING INPUT ENTER RESET D ZOOM VOLUME MENU 1234567890qaqsqdqhqfqg For details, see “Smart APA” in “The Function Menu” on page 24. c KEYSTONE (Trapezoidal distortion correction)/TILT key Adjusts the tilt of the projector, or the trapezoidal distortion of the image manually. Each time you press this key, the Tilt menu and the V Keystone menu are displayed in turn. Use the arrow keys (v/V/b/B) for adjustment. d LENS key Each time you press the key, the adjustment menu is displayed alternately between Lens Focus and Lens Zoom. e AUTO FOCUS key f RESET key Resets the value of an item to its factory preset value or returns the enlarged image to its original size. This key functions when the menu or a setting item is displayed on the screen. g FREEZE key Freezes the projected picture. To cancel the frozen picture, press the key again. h PIC MUTING key Cuts off the picture. Press again to restore the picture. i D ZOOM (Digital Zoom) +/– key Enlarges the image at a desired location on the screen. j Infrared transmitter k ?/1 (On/Standby) key l v/V/b/B (Arrow) keys m ENTER key n MENU key o VOLUME +/– keys Location and Function of Controls p AUDIO MOTING key Press to temporarily cut off the audio output from the speaker. Press again or press the VOLUME + key to restore the sound. Before using the Remote Commander Pull out the clear film from the lithium battery holder. To replace a battery 1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander. 2 Install the lithium battery. Face the + side up. 3 Put the lithium battery holder back into the Remote Commander. Notes on the lithium battery • A button type lithium battery (CR2025) is used in the Remote Commander. Do not use batteries other than CR2025. • Keep the lithium battery out of the reach of children. • Should the battery be swallowed, immediately consult a doctor. Notes on Remote Commander operation • Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the remote control detector. • The operation range is limited. The shorter the distance between the Remote Commander and the remote control detector is, the wider the angle within which the commander can control the projector becomes. Overview Location and Function of Controls B Projecting the Picture Installing the Projector The distance between the lens and the screen varies depending on the size of the s...
Эта инструкция также подходит к моделям:Проекторы - VPL-CS21 (896.17 kb)