Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
600 SVGA VESA 56 Hz 35.156 56.250 H-pos V-pos 1024 17 SVGA VESA 60 Hz 37.879 60.317 H-pos V-pos 1056 18 SVGA VESA 72 Hz 48.077 72.188 H-pos V-pos 1040 19 SVGA VESA 75 Hz 46.875 75.000 H-pos V-pos 1056 20 SVGA VESA 85 Hz 53.674 85.061 H-pos V-pos 1048 21 832 . 624 Macintosh 16” 49.724 74.550 H-neg V-neg 1152 22 1024 . 768 XGA VESA 43 Hz 35.524 43.479 H-pos V-pos 1264 23 XGA VESA 60 Hz 48.363 60.004 H-neg V-neg 1344 24 XGA VESA 70 Hz 56.476 69.955 H-neg V-neg 1328 25 XGA VESA 75 Hz 60.023 75.029 H-pos V-pos 1312 26 XGA VESA 85 Hz 68.677 84.997 H-pos V-pos 1376 27 1152 . 864 SXGA VESA 70 Hz 63.995 70.019 H-pos V-pos 1472 28 SXGA VESA 75 Hz 67.500 75.000 H-pos V-pos 1600 29 SXGA VESA 85 Hz 77.487 85.057 H-pos V-pos 1568 30 1152 . 900 Sunmicro LO 61.795 65.960 H-neg V-neg 1504 31 Sunmicro HI 71.713 76.047 C-neg 1472 32 1280 . 960 SXGA VESA 60 Hz 60.000 60.000 H-pos V-pos 1800 33 SXGA VESA 75 Hz 75.000 75.000 H-pos V-pos 1728 34 1280 . 1024 SXGA VESA 43 Hz 46.433 43.436 H-pos V-pos 1696 35 SGI-5 53.316 50.062 SonG 1680 36 SXGA VESA 60 Hz 63.974 60.013 H-pos V-pos 1696 37 SXGA VESA 75 Hz 79.976 75.025 H-pos V-pos 1688 43 480/60p 480/60p ( )Progressive component 31.470 60.000 SonG 774 44 575/50p 575/50p ( )Progressive component 31.250 50.000 SonG 920 45 1080/50i 1080/50i 28.130 50.000 2640 47 720/60p 720/60p 45.000 60.000 1650 48 720/50p 720/50p 37.500 50.000 1980 49 1080/48i 1080/48i 27.000 48.000 2750 After the data has been recalled from the preset memory about the following signals, you can use these preset data by adjusting SIZE H. Make fine adjustment by adjusting SHIFT. Signal Memory No. SIZE H Super Mac-2 23 1312 SGI-1 23 1320 Macintosh 19” 25 1328 Macintosh 21” 28 1456 Sony News 36 1708 PC-9821 1280 . 1024 36 1600 WS Sunmicro 37 1664 Note A part of the screen is displayed in black depending on the aspect ratio of the input signal. The adjustable items in the VIDEO MEMORY Items which can set in the VIDEO MEMORY are: •“CONTRAST”, “BRIGHT”, “COLOR”, “HUE”, “SHARP”, “RGB ENHANCER”, “D.PICTURE”, “COLOR TEMP”, “COLOR SYS”and “DRC-MF” in the PICTURE CTRL menu. •“ASPECT”, “SCAN CONV”, “V SCROLL”and “TITLE AREA”in the INPUT SETTING menu. 26 (GB) The SET SETTING Menu / The INSTALL SETTING Menu The SET SETTING Menu / The INSTALL SETTING Menu The SET SETTING menu is used for changing the settings of the projector. INPUT-A SET SETTING STATUS: INPUT-A: ON COMPONENT INPUT-B: COMPONENT LANGUAGE: POWER SAVING: SIRCS RECEIVER: ENGLISH OFF FRONT&REAR STATUS (on-screen display) Sets up the on-screen display. ON: Shows all of the on-screen displays. OFF: Turns off the on-screen displays except for the menus, a message when turning off the power, and warning messages. INPUT-A Selects the computer, component, DTV YPBPR or DTV GBR signal input from the INPUT A connectors. Note If the setting is not correct, “Please check INPUT-A setting.” appears on the screen and the color of the picture becomes strange or the picture is not displayed. INPUT-B Selects the computer, component, DTV YPBPR or DTV GBR signal input from the INPUT B connectors. Notes • If the setting is not correct, “Please check INPUT-B setting.” appears on the screen and the color of the picture becomes strange or the picture is not displayed. • Set the progressive component signal, e.g. DVD, to “COMPONENT”; 15k RGB signal, e.g. game machines, to “COMPUTER”. LANGUAGE Selects the language used in the menu and on-screen displays. Available languages are: English, French, German, Italian, Spanish, Japanese and Chinese. POWER SAVING When set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes. The power saving mode is canceled when a signal is input or any key is pressed. SIRCS RECEIVER Selects the remote control detectors (SIRCS receiver) on the front and rear of the projector. FRONT & REAR: Activates both the front and rear detectors. FRONT: Activates the front detector only. REAR: Activates the rear detector only. The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the settings of the projector. INPUT-A INSTALL SETTING KEYSTONE MEM: OFF DIGIT KEYSTONE: 01 INSTALLATION: FLOOR-FRONT CINEMA BLACK: ON LAMP TIMER: 234h KEYSTONE MEM ON: DIGIT KEYSTONE setting is stored. The data is retrieved when the projector power is turned on. The setting will remain the same every time. OFF: DIGIT KEYSTONE is reset to 0 when the power is turned on the next time. 27 (GB) The INSTALL SETTING Menu The INSTALL SETTING Menu Corrects the trapezoid caused by the projection angle. If the base edge is longer, set a negative value; if the upper edge is longer, set a positive value to square the image. Note If “ZOOM”, “FULL” or “NORMAL” have been selected in the ASPECT of the INPUT SETTING, you can change the trapezoid. INSTALLATION Sets to reverse the picture horizontally or vertically. FLOOR-FRONT: The picture is not reversed. CEILING-FRONT: The picture is reversed horizontally and vertically. FLOOR-REAR: The picture is reversed horizontal...