Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Normal A picture with normal 4:3 aspect ratio is displayed in the center of the screen to fill the vertical screen size. Wide Zoom A 4:3 aspect ratio picture is enlarged and the upper and lower portions of the picture are compressed to fit the 16:9 screen. Use this mode to view news, variety shows, etc. Zoom A normal 4:3 aspect ratio picture is enlarged vertically and horizontally in the same ratio to fill the 16:9 screen. This mode is ideal for viewing a wide-format movie. Full Through One-to-one mapping is done on a squeezed 16:9 picture. It is displayed in the center of the screen. Normal Through One-to-one mapping is done on a 4:3 normal aspect ratio picture. It is displayed in the center of the screen. Notes • You can adjust the vertical position of the picture with “V Position” in the INPUT SETTING menu when “Zoom” or “Subtitle” is selected, or when “Full Through” or “Normal Through” is selected for video (50Hz) or progressive component (50p) input signal. • You can adjust the position of the subtitles with “Title Area” in the INPUT SETTING menu only when “Subtitle” is selected. • If “Full Through” or “Normal Through” is selected when a video (50 Hz) or progressive video (50p) signal is input, the picture may not be completely displayed on the screen due to the number of dots of the LCD panel. Notes on selecting the wide screen mode • Select the wide screen mode taking into account that changing the aspect ratio of the original picture will provide a different look from that of the original image. • Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the wide mode may constitute an infringement of the rights of authors or producers, which are legally protected. Selecting the Wide Screen Mode 21GB Projecting Projecting Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of program or room condition. + – + – INPUTLIGHT STANDARD CINEMADYNAMIC USER 2 PICTURE MODE USER 3USER 1 DDE MENUAPA MUTING VOLUME SIDE SHOT RESETWIDE MODE ENTER PICTURE MODE buttons DYNAMIC STANDARD CINEMA USER 1, 2 and 3 Press one of the PICTURE MODE buttons (DYNAMIC, STANDARD, CINEMA and USER 1, 2 and 3). DYNAMIC Select for enhanced picture contrast and sharpness. STANDARD Recommended for normal viewing condition in your home. Also select to reduce roughness when viewing the picture with DYNAMIC. CINEMA Select for soft, film-like picture. USER 1, 2 and 3 You can adjust the quality of the picture to suit your taste and store the settings into the selected memory of the projector. Press one of the USER 1, 2 and 3 buttons, then adjust the picture by using the menus. The settings are stored, and you can view the picture with the adjusted picture quality by pressing the button. (1 page 25) Selecting the Picture Viewing Mode GB 22 Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus The projector is equipped with an on-screen menu for making various adjustments and settings. The setting items are displayed in a pop-up menu or in a sub menu. If you select an item name followed by dots (...), a sub menu with setting items appear. You can change the tone of the menu display and the menu language displayed in the on-screen menu. To change the menu language, see “Selecting the Menu Language” on page 16. Display items Input signal indicator NTSC 3.58 Video 1 Input signal setting indicator Picture adjustment menu Contrast: M in Input signal indicator Shows the selected input channel.x is displayed when no signal is input. You can hide this indicator using “Status” in the MENU SETTING menu. Input signal setting indicator For Input-A: Shows “Computer,” “Component” or “Video GBR.” For Video/S Video input: Shows “Auto” or the “Color System” setting in the SET SETTING menu. + – + – INPUTLIGHT STANDARD CINEMADYNAMIC USER 2 PICTURE MODE USER 3USER 1 DDE MENUAPA MUTING VOLUME SIDE SHOT RESETWIDE MODE ENTER 2-4 1 Using the Menus Operation through the Menus 23GB Using the Menus Using the Menus 1 Press MENU. The menu appears. The menu presently selected is shown as a yellow button. MENU Smar t APA: On Auto Input Search: Off Input-A Signal Sel.: Computer Color System: Auto Po wer Sa ving: Off Illumination: Off SET SETTING Input A 2 Press M or m to select a menu, and press , or ENTER. The selected menu appears. 3 Press M or m to select an item you want to adjust and press , or ENTER. The setting items are displayed in a pop-up menu or in a sub menu. Pop-up menu Menu Setting items or ENTER Input A Sub menu Menu Setting items 4 Make the setting or adjustment on an item. When changing the adjustment level To increase the value, press M or ,. To decrease the value, press m or <. Press ENTER to restore the original screen. When changing the setting Press M or m to change the setting. Press < or ENTER to restore the original screen. To clear the menu Press MENU. To reset items tha...