Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
39 39 GB Troubleshooting Symptom Cause and Remedy “Please check INPUT-A setting.” appears in spite of inputting the correct signal from INPUT A. • Setting of “Input-A Signal Sel.” in the SET SETTING menu is incorrect. c Select “Computer,” “Video GBR” or “Component” correctly according to the input signal (see page 33). On-screen display does not appear. • “Status” in the SET SETTING menu has been set to “Off.” c Set “Status” in the SET SETTING menu to “On” (see page 32). Color balance is incorrect. • Picture has not been adjusted properly. c Adjust the picture (see page 30). • Projector is set to wrong color system. c Set “Color System” in the SET SETTING menu to match the color system being input (see page 33). The picture is too dark. • Contrast or brightness has not been adjusted properly. c Adjust the contrast or brightness in the “Adjust Picture...” menu properly (see page 29). • The lamp has burnt or dims. c Replace the lamp with a new one (see page 36). The picture is not clear. • Picture is out of focus. c Adjust the focus (see page 24). • Condensation has occurred on the lens. c Leave the projector for about two hours with the power on . The image extends beyond the screen. • The APA key is pressed although there are black edges around the image. c Display the full image on the screen and press the APA key. c Adjust “Shift” in the INPUT SETTING menu properly (see page 31). The picture flickers. • “Dot Phase” in the INPUT SETTING menu has not been adjusted properly. c Adjust “Dot Phase” in the INPUT SETTING menu properly (see page 31). Sound Symptom Cause and Remedy No sound. • Cable is disconnected or the connections are wrong. c Check that the proper connections have been made (see page 17). • The audio connecting cable is incorrect. c Use a no-resistance stereo audio cable (see page 18). • The sound is not adjusted properly. c Adjust the sound (see page 25). GB 40 Troubleshooting Remote Commander Symptom Cause and Remedy The Remote Commander does not work. • The Remote Commander batteries are dead. c Replace with a new battery (see page 15). Others Symptom Cause and Remedy The LAMP/COVER indicator flashes. • The lamp cover or the air filter cover is detached. c Attach the cover securely (see pages 36 and 37). The LAMP/COVER indicator lights up. • The lamp has reached the end of its life. c Replace the lamp (see page 36). • The lamp becomes a high temperature. c Wait for 90 seconds to cool down the lamp and turn on the power again (see page 26). The TEMP/FAN indicator flashes. • The fan is broken. c Consult with qualified Sony personnel. The TEMP/FAN indicator lights up. • The internal temperature is unusually high. c Check to see if nothing is blocking the ventilation holes. Both the LAMP/COVER and TEMP/FAN indicators light up. • The electrical system breaks down. c Consult with qualified Sony personnel. Warning Messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning and Remedy High temp.! Lamp off in 1 min. • Internal temperature is too high. c Turn off the power. c Check to see if nothing is blocking the ventilation holes. Frequency is out of range! • This input signal cannot be projected as the frequency is out of the acceptable range of the projector. c Input a signal that is within the range of the frequency. • The resolution setting of the output signal of a computer is too high. c Set the setting of output to XGA (VPL-CX5) or SVGA (VPLCS5) (see page 17). Please check INPUT-A setting. • You have input RGB signal from the computer when “Input-A Signal Sel.” in the SET SETTING menu is set to “Component.” c Set “Input-A Signal Sel.” correctly (see page 33). Please replace the LAMP. • It is time to replace the lamp. c Replace the lamp. Maintenance 41 41 GB Troubleshooting Caution Messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning and Remedy Not applicable! • You have pressed the wrong key. c Press the appropriate key. GB 42 Troubleshooting B Other Specifications Optical characteristics Projection system 3 LCD panels, 1 lens, projection system LCD panel VPL-CS5: Superhigh-aperture 0.7-inch SVGA panel, 1,440,000 pixels (480,000 pixels . 3) VPL-CX5: Superhigh-aperture 0.7-inch XGA panel with micro-lens array, about 2,360,000 pixels (786,432 pixels . 3) Lens 1.2 times zoom lens (manual) f 28.2 to 33.8 mm/F 1.8 to 2.15 Lamp 165 W UHP Projection picture size Range: 40 to 150 inches (diagonal measure) Light output VPL-CS5: ANSI lumen1) 1800 lm VPL-CX5: ANSI lumen1) 2000 lm (When the Lamp Mode is set to “High”) Throwing distance When the XGA signal is input 40-inch: 1.5 to 1.9 m (4.9 to 6.2 feet) 60-inch: 2.3 to 2.9 m (7.5 to 9.5 feet) 80-inch: 3.1 to 3.8 m (10.2 to 12.5 feet) 100-inch: 3.9 to 4.8 m (12.8 to 15.7 feet) 120-inch: 4.7 to 5.7 m (15.4 to 18.7 feet) 150-inch: 5.9 to 7.2 m (19.4 to 23.6 feet) There may be a slight difference between the actual value and the design value shown above. 1) AN...
Эта инструкция также подходит к моделям:Проекторы - VPL-CX5 (2.1 mb)