Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
30 (to CONTENTS) CONTENTS Projection Select the input There are two kinds ) MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTECALL RESIZE VOLUME/ADJUST LASER5-a,5-b 5-b 5-a,5-b 5-b KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON Remote control Control panel (Main unit side) 5-a INPUT INPUT Select the input INPUTrepeatedly. At shipping from factory, "Analog RGB(1)" connected COMPUTER IN 1 connector or connected to VIDEO Jack can be selected. (You can select "Camera" when using the model with a document imaging The icon and the name of the selected on the screen. Note • The types of input sources selected when the INPUT button is pressed repeatedly can be set from the menu screen. 45 5-b INPUT INPUT ENTER ENTER Continued Press INPUT and hold for two seconds. The input source selection menu appears. Select the input source to project with theselection button ( ).Regardless of the contents of input source settings on the menu screen, all the input sources are displayed here to be selected. Press ENTER A picture of the selected input source is projected. When a sound signal source is also connected, sound is developed from the speaker. / Operations 31 Operations 4 5 45 Continued Projection (Signal sent from • If you project an image the computer, the image may not be projected depending on the computer In this case, turn off the computer display. For details on controlling the etc., refer to the computer's manual • The projector projects an image by • The image quality of a computer signal It is recommended to set the external monitor connected to the • The projector can be also applied to DDC2B If your computer is applied to the DDC, start up your computer after Adjust the picture size by turning thezooming lever. Turn to the right to enlarge the picture. Turn to the left to reduce the picture. Focus on the picture by turning thefocusing ring. A still picture is recommended for focusing. Notes 31 Operations 4 5 45 Continued Projection (Signal sent from • If you project an image the computer, the image may not be projected depending on the computer In this case, turn off the computer display. For details on controlling the etc., refer to the computer's manual • The projector projects an image by • The image quality of a computer signal It is recommended to set the external monitor connected to the • The projector can be also applied to DDC2B If your computer is applied to the DDC, start up your computer after Adjust the picture size by turning thezooming lever. Turn to the right to enlarge the picture. Turn to the left to reduce the picture. Focus on the picture by turning thefocusing ring. A still picture is recommended for focusing. Notes (to CONTENTS) CONTENTS (to CONTENTS) CONTENTS Projection 32 KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON 6 6 MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTECALL RESIZE VOLUME/ADJUST LASER Remote control Control panel (Main unit side) 6 Press VOL/ADJ Press the (+) button Press the (-) button to Notes • When changing the projecting angle, 20 • When the screen image is distorted in KEYSTONE button to adjust the distortion. 35 • Due to the lamp characteristic, flickers may occasionally malfunction of the unit. • The lamp may rarely burst with a big sound. • The projector's liquid crystal panel is made using extremely but there may be black spots (pixels that do not light) or bright spots the panel. Please note that these are not malfunctions. • When trying to press the button whose operation is not available, appears. • When supplying the signal not compatible to the projector, the icon appears. • When signals are not input from the input source, the icon appears. • The projector may stop operating if the surrounding temperature is too high is clogged with dust. 62 Operations (to CONTENTS) CONTENTS Turning 33 KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON 2 1,2 1,2 MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTECALL RESIZE VOLUME/ADJUST LASER Remote control Control panel (Main unit side) Indicators Operations 2 1 (Green) (Green) (Green) (Off) (Off) (Off) flushing(Orange) (Orange) A A B C B C ON/STANDBY ON/STANDBY ON/STANDBY ON/STANDBY ON LAMP FAN ON LAMP FAN ON LAMP FAN Press ON/STANDBY after An instruction message appears on the screen and disappears When the message disappears, operation Press ON/STANDBY again. Cooling starts. Once cooling is completed, FAN indicators turn off and the standby mode is set. (The ON indicator turns in orange.) To protect the light source lamp, the LAMP indicator blinks as long as mum of cooling is necessary. The power cannot be turned back on during thistime. Unplugging the power cord at this time will shorten the lamp's duration The cooling fan continues to run for a while to expel the heat remaining inside.If you are in a hurry, however, you may unplug the po...
Эта инструкция также подходит к моделям:Проекторы - Conference Room Projectors TLP-781 (1.76 mb)
Проекторы - TLP-780 (1.76 mb)
Проекторы - TLP-781 (1.76 mb)